The Honeywell T8775C 1005 thermostat provides single-stage temperature control for 24V heating-cooling systems with manual changeover from heat to cool.
- Attractive styling complements any decor.
- Large easy-to-read display.
- The temperature reading is easily seen from a distance.
- Backlit display.
- On-demand backlighting makes it easy to read the display in a dark room or hallway.
- No batteries required.
- The temperature setting is held permanently in memory in the event of a power failure.
- Powered through heating-cooling system controls.
- System and Fan switches on the T8775C model.
- Manual changeover from heat to cool on T8775C model.
- Easy installation, set up and 5-minute compressor bypass saves time and increases installer productivity.
- Easily configurable by the use of DIP switches.
- F or C temperature display.
- Selectable heating cycle rates (1, 3, 6, 9 cph) for a variety of applications.
- Cooling cycle rate is fixed at 3 cph.
- This is the standard compressor setting for quick installations.
- Minimum off-time for compressors in the cooling mode.
- Protects and extends the life of the equipment.
- Decorative cover plate is available to cover marks on the wall or to mount the T8775 Thermostat onto an electrical box.
|Stages of Heat||1|
|Stages of Cool||1|
|Use with Heat Pump||No|
|Power Method||Power Stealing / Battery|
|Use with Gas/Oil||Yes|
|Use with Electric Furnace||Yes|
|Resume / Adaptive Intelligent Recovery Capability||No|
|Outdoor Temperature Sensor Capability||No|
|Indoor Temperature Sensing Capability||No|
|Ventilation Control/Independent Circuit Switching||No|
|Humidifier Panel Indication||No|