Select if:

• You are adding or replacing standard split system central air conditioning or a heat pump to a forced air duct system
  And / or…
• The air conditioner (condenser) or heat pump will sit outside the home, and the furnace (or air handler) is located inside the home
• You have ducting in the home (or will be installing it) to transfer the air. (The same ducting used for heating can be used for air conditioning.)
• A condenser or heat pump is the major component in a complete central air conditioning system. To put together a complete air conditioning system with its appropriate components, use our easy System Selector online.

Select if:

• You are replacing a self-contained air conditioner or heater
  And / or...
• Your complete system will be located entirely outside the home on the ground or roof
• You want air conditioning with the option of gas or electric heat in the same equipment
• You have ducting in the home (or will be installing it) to transfer the air
• You need equipment that will work for a mobile home or standard home
• You have 220 volts AC available

Select if:

• You are adding or replacing a mini-split central air conditioner or a mini-split heat pump
  And / or…
• You do not have air ducts in the home (which would be required for other air conditioning options)
• You want to add air conditioning to one or more rooms, with the least amount of physical interior space disturbance
• You would like separate temperature controls for each room
• The air conditioner (condenser) or heat pump will sit outside the home, and the mini-split air handler(s) will be located inside the home on a room wall, or on/in the ceiling of each room

Select if:

• You are adding or replacing a PTAC unit.
  And / or...
• You will be heating and cooling a small home, or partial area of a home.
• You do not have, or do not plan on installing ductwork.
• Your only available fuel is electricity.
• You have rooms that require independent heating and cooling equipment.
• You have or can cut a hole in an outside wall through which to install the PTAC unit.

• These portable units make heating, cooling or dehumidifying areas of your home or office easy! No installation required. 12,000 BTUs will heat / cool approximately 400 square feet, and 14,000 BTUs will heat / cool approximately 450 square feet. Simply plug in, and run the vents to the window using the window kit. The remote control gives you full command of your comfort from anywhere in the room. A fast and affordable heating and air conditioning solution for anywhere in your home.