Honeywell HE365DG115 Power Fan Humidifier 110v Power Fan Humidifier with TrueIAQ Digital Control (Large Homes)

Your Price: $279.99
Compare to: $367.99
You save: $88.00

See additional images

This Product Includes:

About This Product

Installation Video Included.

Installed on the warm air plenum of a forced air furnace, this model utilizes the flow through design that flushes away minerals not deposited on the replaceable water panel. Comes with the TrueIAQ digital control system which raises and lowers the humidity set point as the weather changes for optimum comfort. 18 Gallon capacity makes it capable of humidifying larger homes up to 4,500 sq ft.

This humidifier should not be installed on horizontal flow ducting.

UNIT SIZE 14 W x 15 1/4H x 10 1/4D
PLENUM OPENING 13 1/2W x 14 1/16H
ELECTRICAL DATA 120 V - 60 Hz - 0.7 AMP

Other items needed for the installation that are not included: 1/4" copper tubing for water line, 1/2" ID plastic tubing for drain, 2-conductor 18 to 22 gauge wire. These are available in our easy installation kit.

Included in the Honeywell HE365DG115 Power Fan Humidifier Box:

(1) Honeywell Humidifier
(1) Water Panel
(1) Saddle Valve
(1) Bag of Wire Nuts
(1) Bag of Screws
(1) Honeywell TrueIAQ Digital Control
(1) Outdoor Temperature Sensor
(1) Installation Manual
(1) Owners Manual
(1) TrueIAQ Installation Manual
(1) Maintenance Sticker
(1) Built in 110v to 24v transformer

Product Specifications

Type There are two basic humidifier types: bypass and power fan. Each simply uses a different method to move air through them. Power fan humidifiers use a 110 volt fan to move air through them. Bypass humidifiers do not have a fan, but instead require a 6” duct to be connected to the side and then to the opposite air duct system from the humidifier. That means for bypass models that if the humidifier is installed on the supply plenum, the 6” duct will connect to the humidifier and the return plenum, and if the humidifier is installed on the return plenum, the 6” duct will attach to humidifier and the supply plenum. Both humidifier types – bypass and power fan – will provide the same benefits to you. The only difference is the technology used to do so. The advantage to power fan models is since they do not require additional ductwork, they can be installed faster and in tighter spaces. The advantage to bypass models is that they cost a bit less.	Power-Fan

Maximum Coverage Area Maximum coverage area means this humidifier will perform well for home sizes up to the square footage indicated, provided that the home is “tight”. A tight home is typically is one that is sealed well around windows and doors and does not leak air to/from the outdoors. Note that humidifiers will perform well for smaller homes as well since the controller regulates the amount of humidity automatically to adjust to home size.	4200 Square Feet

Water Capacity	18 Gallons/Day

Evap. Capacity	.75 Gallons/Hour

Electrical Requirements Humidifiers with 24 volt AC electrical requirements obtain such by connecting to either 24VAC from the furnace, or by adding a transformer to the furnace to create such. Most installations can use the 24VAC that is already accessible in the furnace. Humidifiers with 110 volt AC electrical requirements simply plug into a standard outlet (receptacle) and require no special wiring for this part. It is recommended, however, that the outlet/receptacle be dedicated for the humidifier, and that it can be shut off by the same power safety switch that turns off the furnace.	24 and 110V

Remote Sensing Bulb A remote sensing bulb is a small (about ¼” round) sensor that mounts outside the home and connects by light gauge wire (18 to 22 gauge, 2-conductor) to the humidifier controller. This sensor provides temperature readings to the computerized controller which allows the humidifier to automatically adjust humidity levels in the home based on outside air temperature.	Included

Plenum Opening Size	13.5W x 14.06H inches

Width	14 Inches

Height	15.25 Inches

Depth	10.25 Inches

Warranty	5 Years