|
|
You are viewing:
Furnaces / Heaters
> Forced Air
> Standard Homes
> Natural Gas / LP
> 95% Efficiency
> Variable Speed Blower, Two-Stage Burner
> Goodman GMV950453BX Gas Furnace
|
|
|
|
|
Goodman GMV950453BX Gas Furnace
|
46,000/32,000 BTU Furnace, 95% Efficiency, 2-Stage Burner, 1,200 CFM Variable Speed Blower, Upflow/Horizontal Flow Application
|
|
|
|
 |
This product is not available for purchase. Please email or call for more information. |
 |
|
See additional images
|
|
     |
|
|
The Goodman® GMV95 Two-Stage, Variable-Speed Gas Furnace features a patented aluminized-steel tubular heat exchanger and energy-efficient Hot Surface Ignition system. This furnace is run-tested for heating or combination heating/cooling applications. (Please read this Important Safety Notice.)
Standard Features - Operates as a natural gas furnace out of the box, and can be easily converted to a propane furnace with optional propane conversion kit (see "accessories" tab).
- Furnaces' corrosion-resistant, aluminized-steel tubular heat exchanger and stainless-steel recuperative coil make it a durable and long lasting heater
- Goodman Lifetime Limited Warranty on Heat Exchanger plus 10-year Furnace Replacement Limited Warranty
- Furnace is designed for multi-position installation (upflow, horizontal right or left)
- Energy-saving Hot Surface Ignition system with Norton® Mini-Igniter and patented adaptive learning algorithm
- Auto-Comfort mode to maintain a comfortable climate 2-stage gas valve
- Super-efficient, quiet variable-speed blower motor
- Quiet, 2-speed, induced-draft blower assembly
- Integrated furnace control with diagnostics
- Low-voltage terminal blocks
- Suitable for direct vent (2-pipe) or non-direct vent (1-pipe) applications. The direct vent furnace setup uses outside air for combustion which increases comfort and furnace energy efficiency.
- Convenient left or right connection for gas/electric service
- All Goodman furnace models comply with California NOx Standards
- Not intended for use in mobile homes
Cabinet Features - Heavy-gauge, reinforced, fully insulated furnace steel cabinet with durable, Architectural Gray baked-enamel finish
- Foil-faced insulation lines the furnaces' heat exchanger compartment
- Top venting standard; alternate flue/vent located on right
- Gas heater has bottom or side air inlet; removable, solid bottom
A federal energy efficiency tax credit of up to $1,500 is available for this furnace if placed in service from January 1st, 2009 to December 31st, 2010. The energy tax credit covers 30% of the equipment, installation supplies and labor costs up to $1,500. Take advantage of this limited-time energy tax rebate - act today and don't miss out on these great furnace rebates!
|
High Fire Input BTU
|
46000 BTU |
|
High Fire Output BTU
|
45000 BTU |
|
Low Fire Input BTU
|
32000 BTU |
|
Low Fire Output BTU
|
30800 BTU |
|
Maximum CFM
|
1200 @ 0.5" ESP |
|
Efficiency
|
96 % AFUE |
|
Tax Credit
This product may qualify for an energy efficiency tax credit. |
Yes |
|
Blower Cooling Capacity
|
1.5 to 3 Ton |
|
Configuration
|
Up-Flow/Horizontal-Flow |
|
Maximum Breaker Size
|
15 Amps |
|
ENERGY STAR® Qualified
|
Yes |
|
Supply Air Opening Size
|
16 x 19.875 Inches |
|
Flue Pipe Diameter
This refers to the size of the flue pipe needed, and not necessarily the actual connection size on the furnace. Flue diameter is based on length of run and number of elbows used. Please read the installation instructions carefully to ensure correct diameter flue size for your application. |
2 Inches |
|
Width
|
17.5 Inches |
|
Dimensions
|
17.5W x 28D x 40H inches |
|
Weight
|
135 lbs |
|
Heat Exchanger Warranty
|
Lifetime - 10 Year Furnace Replacement |
|
Unit Replacement Warranty
|
10 Years |
|
All Other Parts Warranty
|
10 years |
|
Meets CSA Standards
Canadian Standards Association |
Yes |
|
|
|
 |
|
|
 |
