Aprilaire 700M NEW! 110v Power Fan Humidifier with Manual Control

ON SALE! $234.99
Compare to: $308.99
You save: $74.00

See additional images

This Product Includes:

About This Product

Installation Video Included.

For those rare occurances where an automatic control is not practical, Aprilaire offers a manual control to meet your needs. The Model 700M power fan humidifier (replaces Models 700, 760, and 768) is designed with ease of service in mind. This high-tech humidification system can deliver up to 50% more moisture in comparison to competitive units. Complementing any HVAC system, the 700M has an evaporation capacity of 0.75 gallons per hour, among the highest capacity humidifiers sold. If you own a larger home and want the best, then this may be the humidifier for you, as it will handle up to 4,200 square feet if your home is tight in construction. Includes manual humidistat and one water panel.

Digital Weather Station Features

Easy to read digital display

Shows indoor humidity levels

Monitors indoor temperature

Mounts on wall or sits on table, for placement anywhere in your home

Other items needed for installation that are not included: 1/4" copper tubing for water line, 1/2" ID plastic tubing for drain, 2-conductor 18 to 22 gauge wire. These items are included in our easy installation kit.

The Aprilaire 700A should not be installed on horizontal flow ducting.

Product Specifications

Type There are two basic humidifier types: bypass and power fan. Each simply uses a different method to move air through them. Power fan humidifiers use a 110 volt fan to move air through them. Bypass humidifiers do not have a fan, but instead require a 6” duct to be connected to the side and then to the opposite air duct system from the humidifier. That means for bypass models that if the humidifier is installed on the supply plenum, the 6” duct will connect to the humidifier and the return plenum, and if the humidifier is installed on the return plenum, the 6” duct will attach to humidifier and the supply plenum. Both humidifier types – bypass and power fan – will provide the same benefits to you. The only difference is the technology used to do so. The advantage to power fan models is since they do not require additional ductwork, they can be installed faster and in tighter spaces. The advantage to bypass models is that they cost a bit less.	Power-Fan

Maximum Coverage Area Maximum coverage area means this humidifier will perform well for home sizes up to the square footage indicated, provided that the home is “tight”. A tight home is typically is one that is sealed well around windows and doors and does not leak air to/from the outdoors. Note that humidifiers will perform well for smaller homes as well since the controller regulates the amount of humidity automatically to adjust to home size.	4200 Square Feet

Water Feed Rate	6 Gallons/Hour

Water Capacity	18 Gallons/Day

Evap. Capacity	.75 Gallons/Hour

Electrical Requirements Humidifiers with 24 volt AC electrical requirements obtain such by connecting to either 24VAC from the furnace, or by adding a transformer to the furnace to create such. Most installations can use the 24VAC that is already accessible in the furnace. Humidifiers with 110 volt AC electrical requirements simply plug into a standard outlet (receptacle) and require no special wiring for this part. It is recommended, however, that the outlet/receptacle be dedicated for the humidifier, and that it can be shut off by the same power safety switch that turns off the furnace.	24 and 110V

Remote Sensing Bulb A remote sensing bulb is a small (about ¼” round) sensor that mounts outside the home and connects by light gauge wire (18 to 22 gauge, 2-conductor) to the humidifier controller. This sensor provides temperature readings to the computerized controller which allows the humidifier to automatically adjust humidity levels in the home based on outside air temperature.	Optional

Plenum Opening Size	14.75W x 14.31H inches

Width	15.90 Inches

Height	18 Inches

Depth	10.34 Inches

Warranty	5 Years