(800)865-5931 Mon-Fri 8am-7pm, Sat 9am-2pm CT
Free Shipping See Details
No Sales Tax See Details
Enter your zip for personalized product and service recommendations.
The high-efficiency PGJ packaged gas and electric cooling unit features cooling capacities of 24,000 to 46,000 BTUH and heating input rates from 46,000 to 92,000 BTUH. This unit allows for a ground or rooftop mount downflow application. Fully insulated with blankets of fiberglass, this unit has convenient access panels and bottom handling rails. The PGJ's exterior has a heavy-gauge G-90 galvanized steel cabinet with appliance-quality polyester powder-paint finish with 500-hour salt-spray approval.

  • Revolutionary new high-efficiency design utilizing a variable-speed dc motor
  • Provides constant CFM over a wide range of static pressure conditions independent of duct systems
  • Up to 16 field-selectable airflow settings that can be adjusted to optimize the system CFM for each mode of operation
  • Blower operation designed for soft start and stop for quieter, more efficient operation; eliminates cold blast of air on heating start-up
  • Designed to provide low CFM for efficient fan-only operation
  • Provides improved humidity control and comfort, in addition to using a standard humidistat
  • Watershed base
  • Copper tube/aluminum fin coil
  • Quiet top condenser discharge
  • Totally enclosed, permanently lubricated condenser fan motor
  • High-efficiency compressor with internal relief valve
  • Fully charged R-22 system
  • Liquid line filter drier
  • Power-assisted combustion requiring no vent cap
  • Aluminized steel heat exchanger
  • All models meet California NOX emissions standards
  • Direct Spark Ignition system
  • Heavy-gauge G-90 galvanized steel cabinet with appliance-quality polyester powder-paint finish with 500-hour salt-spray approval

Cooling Capacity

Not sure what size you need? Feel free to use our easy sizing calculator.

Cooling Capacity
34400 BTU
Heating Capacity

The amount of heat, rated in BTUs that the item can produce.

Heating Capacity
75400 BTU

Seasonal Energy Efficiency Ratio (SEER) is a measure of cooling over an entire season. It is determined by comparing the amount of cooling produced in BTUs in relation to the amount of electricity used. A higher SEER means a system is more energy efficient and would provide comfort at a lower utility cost than a lower SEER system.

Nominal CFM

The amount of air that can be moved by the fan, measured in cubic feet per minute (cfm).

Nominal CFM
Maximum Overcurrent Protection (Breaker)

The maximum capacity breaker in the building's circuit panel that can be used on the dedicated electrical line supplying the equipment.

Maximum Overcurrent Protection (Breaker)
40 Amps
58 1/2 Inches
33 5/8 Inches
208 / 230 Volts
Voltage Phase
Heat Exchanger Warranty
10 Years
Parts Warranty
5 Years