Place Your Order by 1 pm for Same-Day Shipping

America's Heating & Cooling Store, Est 2002
Free Shipping
See Details
My Location:
Chicago, IL

1.5 to 2 Ton Standard Multi-Positional Air Handler

Model: Goodman ARUF182416

Actual product may vary from photos.

This product is no longer available.

Model: Goodman ARUF182416

highlights

The Goodman® 2006 ARUF Multi-Position Air Handler is suitable for use with refrigerants R-410A and R-22. This unit may be installed in a variety of locations.

The unit can operate with a heat pump or condenser of two different tonnages, as noted in the product description above. The unit comes equipped with an orifice (flowrater) for the larger listed tonnage. If you wish to pair the air handler with a condenser or heat pump of the smaller tonnage, an orifice in that tonnage will need to be used (unless a TXV is specified instead). If you are purchasing a new Goodman heat pump or condenser, the required orifice can be found on our site by clicking the Accessories tab on the product page for that item. However, if you are just purchasing this air handler and wish to pair it with equipment of the lower tonnage rating as listed on the description for this air handler, you will need to separately purchase the smaller orifice and install it in the air handler before operating. See this step-by-step guide to learn how to easily do so. Alternatively, instead of an orifice a thermostatic expansion valve (TXV) may be used or required for some equipment, such as 14 SEER and higher heat pumps and all equipment that uses R-410A refrigerant (see equipment spec sheets for details or call us for assistance).

For Tips for Selecting Matched Components and Line Sets click here.

Standard Features

  • Check flowrater expansion device for cooling-only and heat pump applications
  • Direct-drive, multi-speed motor
  • Transformer and blower time-delay on all units

Cabinet Features

  • Rust-resistant, fully insulated steel cabinet
  • Galvanized, stucco-embossed finish
  • Attractive Architectural Gray painted front panels
  • Built-in coil has horizontal, vertical and downflow drain pans with secondary drain connections
  • Built-in filter rack for 1” filter (filter not included)
  • Power supply entry at top; low-voltage entry on left side and top

If your air handler will be installed above a conditioned space, your local code may require a secondary drain pan. See Accessories for details.

Specs
System Information
view information
Configuration
Downflow / Horizontal / Upflow
view information
Fuel Type
Electricity
view information
Requires Downflow Kit
no
view information
Refrigerant
R-22 / R-410A
Performance
view information
Blower Cooling Capacity
1.5 / 2 Tons
view information
Blower Type
Multi-Speed
view information
Electric Heat Capabilities (Optional)
10 / 15 / 8 Kilowatts
Electrical Information
view information
Frequency
60 Hz
view information
Voltage Phase
1
view information
Maximum Overcurrent Protection (Breaker)
15 Amps
view information
Voltage
208 / 230 / 240 Volts
Line Set Information
view information
Liquid Line Size (OD)
3/8 Inches
view information
Suction Line Size (OD)
3/4 Inches
Product Dimensions
view information
Width
15.000000000 Inches
view information
Depth
22.000000000 Inches
view information
Height
42 1/8 Inches
Shipping Weight
120 lbs
Important Measurements
view information
Supply Air Opening Size
13.5 x 11 Inches
view information
Return Air Opening Size
13 1/8 w x 17 15/16 d inches
Warranty
Limited Warranty
10 Years
Reviews
Let's Talk
Get expert assistance from our team
Call our product specialists at: (800) 865-5931
Sun 10am-3pm, Mon-Fri 7am-7pm, Sat 10am-4pm CT
© Copyright 2002-2024, Alpine Home Air Products
Privacy Policy