|
|
 |
|
|
|
This product includes:
Services:
|
The CWD series boiler is a cast iron gas fired boiler designed for use in forced hot water heating systems. It is is a low pressure boiler intended for use in closed heating systems with water temperatures under 240F. This boiler may be vented either vertically or horizontally with combustion air supplied from either outdoors or (under certain conditions) indoors. It is ideal for use in installations where a reliable source of clean indoor combustion air cannot be guaranteed.
Please read this Important Safety Notice
Standard Features - Approved for installation on non-carpeted combustible floors
- Ideal for tightly built and well insulated new homes and houses without chimneys
- Cast iron wet-leg heat exchanger
- Direct horizontal venting or vertical venting options to suit most locations - category III venting; see intallation instructions
- Powered intake and venting
- System Controller provides two zones
- Plug-in outdoor temperature rest control
- Self diagnostics with LED indicators
- Pressure switch
- Electronic ignition and step opening gas valve
- Stainless steel burners
- Altitudes above 2,000ft ratings should be reduced at a rate of 4% for each 1,000ft above sea level
|
The CWD series boiler is a cast iron gas fired boiler designed for use in forced hot water heating systems. It is is a low pressure boiler intended for use in closed heating systems with water temperatures under 240F. This boiler may be vented either vertically or horizontally with combustion air supplied from either outdoors or (under certain conditions) indoors. It is ideal for use in installations where a reliable source of clean indoor combustion air cannot be guaranteed.
Please read this Important Safety Notice
Standard Features - Approved for installation on non-carpeted combustible floors
- Ideal for tightly built and well insulated new homes and houses without chimneys
- Cast iron wet-leg heat exchanger
- Direct horizontal venting or vertical venting options to suit most locations - category III venting; see intallation instructions
- Powered intake and venting
- System Controller provides two zones
- Plug-in outdoor temperature rest control
- Self diagnostics with LED indicators
- Pressure switch
- Electronic ignition and step opening gas valve
- Stainless steel burners
- Altitudes above 2,000ft ratings should be reduced at a rate of 4% for each 1,000ft above sea level
|
|
|
|
