It looks like you don't have flash player installed. Click here to go to Macromedia download page.

System Selector
Let Us Help You
Equipment Sizing
Estimator
Contractor
Assistance
Installation
Videos
Free Shipping
On Heating & Cooling
Equipment Orders
Huge Tax Credits Available!
One of our Thousands
of Satisfied Customers

Greg Evans of Bolingbrook, IL installed his own humidifier.
 
Bookmark and Share

Crown Boiler Company BWF162EN

162,000 BTU, Water Boiler, 82.5% Efficiency, Intermittent Pilot, Natural Gas/LP, Power Vented

LEARNING CENTER
for Furnaces / Heaters
Your Price: $2,581.99
Compare to: $3,382.99
You save: $801.00
 
Crown BWF Series Front
 
See additional images
This Product Includes:
Free ShippingPremium GuaranteeContractor Assistance
About This Product
The BWF series boiler is a cast iron gas fired boiler designed for use in forced hot water heating systems. The BWF is intended for installations where a usable chimney is not available. The BWF is normally vented using an approved vertical or horizontal AL29-4C stainless steel venting system, which is not included with the boiler. If a suitable chimney is available, the BWF series can be vented into it using an optional BWF Category I Vent Kit available from Crown. The BWF requires an adequate source of clean combustion air in the boiler room. The BWF boiler is not designed for use in gravity or “open” heating systems.

Please read this Important Safety Notice

Standard Features
  • Approved for installation on non-carpeted combustible floors
  • Cast iron heat exchanger
  • Step opening gas valve for smooth ignition
  • Supply tapping located off top of boiler
  • Integral fan for side-wall venting
  • Category III side-wall or vertical venting with AL294C stainless steel venting material
  • May be chimney vented using optional category I venting
  • Induced draft blower with pressure switch
  • Honeywell electronic ignition system with 30 second pre-purge
  • Universal vent adapter
  • High performance circulator with isolation flanges
  • Stainless steel burners
  • Pressure switch detects venting problems
  • Rollout switch detects heat exchanger blockage
  • Combination temperature/pressure gauge
  • Boiler drain
  • ASME relief valve set at 30 PSI
  • Two-tone powder coated jacket insulated with fiberglass
  • Natural gas
  • For altitudes above 2,000ft, ratings should be reduced at rate of 4% for each 1,000ft above sea level
  • Boiler must be ordered for proper elevation above sea level when being installed at altitudes above 2,000ft
Product Specifications
Efficiency Percentage (AFUE)
 
82.5 % 

Heating Capacity
 
162000 BTU 

Effective Heating Capacity
 
134000 BTU 

Water Capacity
 
5.5 Gallons 

Net Water Rating
 
117000 BTU 

Max Vent Length- Horizontal
 
45 Ft 

Max Vent Length- Vertical
 
39.5 Ft 

Piping Connections - Water
 
1.25 Inch(es) 

Dual Pipe Vent Diameter
 
3 inches 

Dimensions
 
24W x 26.75D x 36.69H inches 

Weight
 
432 lbs 

Cast Iron Sections Warranty
 
Limited Lifetime year(s) 

All Other Parts Warranty
 
Limited 1 Years 
Site design by Innov8ivdesign.com    © Copyright 2003-2009, Alpine Home Air Products. All Rights Reserved. A Todd Arthurs Company, Inc.  Contact Us