(800)865-5931 Monday to Friday 8:30 AM - 5:00 PM Central
0
Free Shipping See Details
|
No Sales Tax See Details
The Crown Boiler Company BSI379SN has been discontinued.
TRY THIS INSTEAD
Please call us for a suitable alternate product.

(800) 865-5931

Monday - Friday

8:30 AM - 5:00 PM Central

The BSI series boilers are low pressure cast iron gas fired steam boilers designed for use in closed steam heating systems. These boilers are Category I draft diverter equipped appliances, which must be vented by natural draft using a lined masonry or listed metal chimney system. An adequate supply of air for combustion, ventilation and dilution of flue gases must be available in the boiler room. These boilers are not designed for use in process or other “open” steam systems.

Please read this Important Safety Notice

Standard Features

  • Factory tested for flame quality, leaks, control system operation and overall performance
  • “Redundant” gas valve
  • Spill switch detects venting problems
  • Rollout switch detects heat exchanger blockage
  • Gauge glass
  • ASME pop safety valve (set at 15 psi.)
  • Can be installed on combustible floors
  • Cast iron heat exchanger with a 12-year limited warranty
  • Stainless steel burners with a lifetime limited warranty
  • Tappings permit installation of Mega-Stor indirect water heater
  • Isolation relay simplifies thermostat wiring
  • Appliance quality, powder-coated jacket
  • Fiber-glass insulation to minimize wasteful heat loss
  • Base and flue constructed of aluminized steel for corrosion resistance
  • Drain valve
  • Built-in draft diverter allows boiler to fit into low spaces
  • Ten sizes from 69,000 to 379,000 BTU input to serve a range of applications from small residential to commercial

Heating Capacity

The amount of heat, rated in BTUs that the item can produce.

Heating Capacity
379,000 BTU
Effective Heating Capacity (BTUs)
312,000
IBR Rating Steam
235,000 BTUs
Water Volume
17.7 Gallons
Efficiency (% AFUE)

The percentage of energy converted into output by the unit. The remaining percentage is lost during the conversion process. The higher the efficiency, the lower the operational cost.

Efficiency (% AFUE)
82.5 %
Water Piping Connections
2 inches
Flue Vent
9 inches
Product Weight
1,125 lbs
Meets CSA Standards

Canadian Standards Association

Meets CSA Standards
Yes
Meets Canadian OEE Standards

Standards established by Canada's Office of Energy Efficiency.

Meets Canadian OEE Standards
No
Width
42 Inches
Depth
30 Inches
Height
45 11/25 Inches
Cast Iron Sections Warranty
12 Years
Parts Warranty
1 Years

In 2002 Alpine Home Air Products became the first company to sell heating, air conditioning and indoor air-quality products online. We have proudly served hundreds of thousands of customers, helping them save time and money by buying their products direct.