It looks like you don't have flash player installed. Click here to go to Macromedia download page.

System Selector
Let Us Help You
Contractor
Assistance
Installation
Videos
Free Shipping
On Heating & Cooling
Equipment Orders
Huge Tax Credits Available!
One of our Thousands
of Satisfied Customers
Stephen Kraft writes:
"Wanted to let you know that the heater coils arrived safe and sound! Thanks for your attention to this and your excellent service. I will be happy to pass on the good word about your online storefront!"
 
Bookmark and Share
GeneralAire 1000
110v Power Fan Humidifier with Automatic Digital Control
LEARNING CENTER
for Indoor Air-Quality Products
Your Price: $279.99
Compare to: $367.99
You save: $88.00
 
Product Image
 
See additional images
This Product Includes:
Free Installation VideoPremium GuaranteeContractor Assistance
About This Product
Installation Video Included.
18 GPD Flow Through Fan-Powered Humidifier featuring GENERALAire’s Exclusive E2 Digital Automatic Humidistat, which incorporates manual or automatic mode with outdoor sensor for temperature compensating control. This unit delivers Elegant Styling for today’s modern mechanical room. The Model 1000 is equipped with patented kinetic trough where water is dispersed uniformly across the pad. We provide a stainless steel valve seat where others do not.

Standard Features

  • E2 Digital Automatic Humidistat that features a manual or automatic mode with an outdoor sensor for temperature compensating control is included.
  • Fan-powered unit mounts easily on the warm air plenum and delivers 18 GPD.
  • Evaporator pad replacement number GA19.
  • A portion of the heated air from the furnace passes through a water-soaked pad where it absorbs additional moisture and then returns for distribution throughout your home.
  • Water is metered into a patented kinetic trough and dispersed uniformly across the pad. Unevaporated water drains from the bottom of the unit to eliminate mineral build-up.

Other items needed for installation that are not included: 1/4" copper tubing for water line, 1/2" ID plastic tubing for drain, 2-conductor 18 to 22 gauge wire. These items are included in our easy installation kit.

  The GeneralAire 1000 should not be installed on horizontal flow ducting.

Product Specifications
Type
There are two basic humidifier types: bypass and power fan. Each simply uses a different method to move air through them. Power fan humidifiers use a 110 volt fan to move air through them. Bypass humidifiers do not have a fan, but instead require a 6” duct to be connected to the side and then to the opposite air duct system from the humidifier. That means for bypass models that if the humidifier is installed on the supply plenum, the 6” duct will connect to the humidifier and the return plenum, and if the humidifier is installed on the return plenum, the 6” duct will attach to humidifier and the supply plenum.

Both humidifier types – bypass and power fan – will provide the same benefits to you. The only difference is the technology used to do so. The advantage to power fan models is since they do not require additional ductwork, they can be installed faster and in tighter spaces. The advantage to bypass models is that they cost a bit less. 
Power-Fan  

Maximum Coverage Area
Maximum coverage area means this humidifier will perform well for home sizes up to the square footage indicated, provided that the home is “tight”. A tight home is typically is one that is sealed well around windows and doors and does not leak air to/from the outdoors. Note that humidifiers will perform well for smaller homes as well since the controller regulates the amount of humidity automatically to adjust to home size. 
4200 Square Feet 

Water Feed Rate
 
6 Gallons/Hour 

Water Capacity
 
18 Gallons/Day 

Evap. Capacity
 
.75 Gallons/Hour 

Electrical Requirements
Humidifiers with 24 volt AC electrical requirements obtain such by connecting to either 24VAC from the furnace, or by adding a transformer to the furnace to create such. Most installations can use the 24VAC that is already accessible in the furnace.

Humidifiers with 110 volt AC electrical requirements simply plug into a standard outlet (receptacle) and require no special wiring for this part. It is recommended, however, that the outlet/receptacle be dedicated for the humidifier, and that it can be shut off by the same power safety switch that turns off the furnace.  
24 and 110V  

Remote Sensing Bulb
A remote sensing bulb is a small (about ¼” round) sensor that mounts outside the home and connects by light gauge wire (18 to 22 gauge, 2-conductor) to the humidifier controller. This sensor provides temperature readings to the computerized controller which allows the humidifier to automatically adjust humidity levels in the home based on outside air temperature. 
Included  

Plenum Opening Size
 
14W x 12H inches 

Width
 
16 Inches 

Height
 
16.5 Inches 

Depth
 
10 Inches 

Warranty
 
Limited 10 Years 
Site design by Innov8ivdesign.com    © Copyright 2003-2009, Alpine Home Air Products. All Rights Reserved. A Todd Arthurs Company, Inc.  Contact Us