Enjoy instant warmth plus lower heating costs with a traditional enclosed or fireplace look heater. New glass front "fireplace look" or enclosed vented hearth heaters provide comfort for hard-to-heat areas. Williams vented hearth heaters are designed to give you maximum efficiency, low fuel consumption and quiet operation. Williams console heaters come with a factory installed electric blower to circulate the heated air through the room. Unit comes from factory set up for natural gas. In order to operate on LP (liquid propane), the Williams 8947 LP Conversion Kit must be purchased seperately. Please read this Important Safety Notice.
NOTICE TO BIRD OWNERS: We understand these furnaces may contain Teflon, which when heated for the first time, may be lethal to birds although harmless to humans. Do not use this product without protecting your bird from possible PTFE poisoning.
- No electricity required for heat ... great during power outages. (Electricity is required for the blower to function.)
- Burners engineered for quiet ignition and maximum heat efficiency.
- Louvered-top design and front grill for improved heat circulation.
- Built in draft diverter to permit close-to-wall installation.
- Factory-installed ceramic fiber logs (Fireplace model).
- Natural and propane gas models (Conversion kit available).
- "Matchless" pilot ignitor.
- Automatic temperature and safety controls. Thermostat may be mounted on the wall or on the furnace cabinet. Included with all models.
For proper venting, do not attach a 90 degree elbow directly to the draft diverter. It is recommended to attach 2 feet (.6m) of straight vent pipe before an elbow is used. Use 45 degree elbows if possible. Run flue pipe as direct as possible; using no more than two elbows.
|Heating Capacity||50000 BTU|
|Effective Heating Capacity (BTUs)||34500|
|Vent Pipe Diameter||4 inches|
|Efficiency (% AFUE)||68 %|
|Fuel Type||Liquid Propane Convertible / Natural Gas|
|Ignition Type||Matchless Pilot|
|Equipment Type||Console Furnace|
|Product Weight||117 lbs|
|Meets CSA Standards||Yes|
|Meets Canadian OEE Standards||No|
|Height||32 87/100 Inches|
|Heat Exchanger Warranty||10 Years|
|Parts Warranty||1 Years|