Friedrich M33TYF

LEARNING CENTER
for Air Conditioning / Cooling

33,000 BTU Cooling (2.75 Ton), 37,900 BTU Heating, 15 SEER Heating / Cooling (Heat Pump), Three-Zone Mini-Split System, 220 Volts, R-410A Refrigerant

ON SALE!

$3,763.99

Compare to:	$4,931.99
You save:	$1,168.00

Return AssuranceWhen you purchase Return Assurance™, you can return anything on your order within 30 days and we'll pay the shipping. Click link for details. Return Assurance™ $25Add

Includes
Free Shipping!

Shipping to Canada?

Write a Review

This product includes:

Friedrich Air multi-zone mini-split systems can be installed in a dual, or tri-zone configuration. Featuring advanced inverter technology, Friedrich mini-split systems let you reach the desired temperature faster, maintain it more accurately, and reduce energy costs. The inverter technology allows each system to adjust capacity and cooling output to provide only the amount of cooling needed at a given time. For example, a 1.5 ton system will operate even more efficiently as a 1.25 ton system if that is all that is needed.

(Note: These heat pumps will not operate in heating mode when the outdoor temperature is below 14°F. The heating capacity at an outdoor temperature of 47°F is 13,600 BTU in the larger zones and 10,700 BTU in the smaller zone, while heating capacity at an outdoor temperature of 17°F is only 9,200 BTU in the larger zones and 7,200 BTU in the smaller zone.)

Standard Features:

Auto swing louvers (up / down)
Continuous 'Air Sweep'
Auto-restart after power interruptions
Auto-shut flaps close when unit is off for a sleeker appearance
Washable, reusable air filters
Removable front grille
Auto-changeover (heat pump models)
Low-ambient operation
24-hour timer and sleep timer
Auto / cool / dry / fan / heat modes
Four fan speeds: high / medium / low / quiet, plus auto-fan
Remote control holder
Unique transmitter codes to prevent unintentional interference with other units when using remote control

System Components:

1 MR36TQY3F 36,000 BTU Outdoor Heat Pump
1 MW09Y3FM 9,500 BTU Indoor Air Handler
2 MW12Y3FM 12,000 BTU Indoor Air Handlers
3 Remote Controls

Complete your system by selecting three line sets from the Accessories tab above. Line sets come in 15 foot, 35 foot, and 50 foot lengths.

Total Cooling Capacity The total amount of cooling delivered by the system. This number is inclusive of all interior air handlers.	33000 BTUs

Total Cooling Capacity	2.75 Ton(s)

Tons per Zone The amount of cooling delivered into the space by each air handler rated in tons.	.78, .98

Maximum Heating Output BTU Learn More The amount of heat, rated in British Thermal Units (BTUs), that the unit can deliver into the space. Not sure how many BTUs you need? Try our easy Equipment Sizing Estimator.	37900 BTU

SEER Learn More Seasonal Energy Efficiency Ratio (SEER) is a measure of cooling over an entire season. It is determined by comparing the amount of cooling produced in BTUs in relation to the amount of electricity used. A higher SEER means a system is more energy efficient and would provide comfort at a lower utility cost than a lower SEER system.	15 SEER

Energy Efficiency Ratio The measure of air conditioner efficiency at its maximum load	8.8 EER

Heating Seasonal Performance Factor Learn More A measure of heat pump efficiency while in a heating mode. The higher the number the better the energy efficiency.	9.0 HSPF

Refrigerant Learn More Inside air conditioning systems is liquid/gas refrigerant. There are two types of this refrigerant available for use, R-22 (more commonly known as Freon), and a newer alternative R-410A. An air conditioning system does not consume refrigerant, but reuses it. As long as there are no leaks in the refrigerant circuit, there is no need to ever add more refrigerant to an air conditioning system. Although R-22 is an effective refrigerant, if it is released into the atmosphere it can contribute to the depletion of the Earth’s ozone layer. The EPA has mandated the phasing out the use of R-22. It is being replaced by R-410A. As of 2010, manufacturer's are required to make all new air conditioners with R-410A. However, R-22 is still available for sale in existing pre-2010-manufactured equipment, and for use in servicing existing R-22 equipment. By 2020, R-22 will no longer be manufactured, but will still be recycled and available for sale.	R-410A

Dehumidification per Zone The amount of water that can be removed from the air rated in pints per hour.	2.9, 3.7 Pts/Hr

Minimum Ampacity	22.5 Amps

Maximum Fuse/Breaker The maximum capacity breaker that the unit can be connected to (This is the best option for consistent performance)	30 Amps

Maximum Line Length The maximum length of line set approved for use with this product.	82 Feet

Maximum Height Difference The maximum vertical distance between the condensing unit and the air handler.	49 Feet

Line Set Connection Type There are two main types of connections for HVAC products brazed and flared. Brazed connections are typically used in standard split systems, and flare connections are typically used on mini splits and can be connected using a wrench.	Flare

ENERGY STAR® Qualified Products earn the ENERGY STAR label by meeting the energy efficiency requirements set forth in ENERGY STAR specifications. The EPA establishes these specifications based on the following set of principles: Product categories must contribute significant energy savings nationwide. Qualified products must deliver the features and performance demanded by consumers, in addition to increased energy efficiency. If the qualified product costs more than a conventional, less-efficient counterpart, purchasers will recover their investment in increased energy efficiency through utility bill savings, within a reasonable period of time. Energy efficiency can be achieved through broadly available, non-proprietary technologies offered by multiple manufacturers. Product energy consumption and performance can be measured and verified with testing. Labeling would effectively differentiate products and be visible for purchasers.	No

Zones The number of interior air handlers connected to the condensing unit. Typically one, two, or three zones.	3

Liquid Line Size The outside diameter of the liquid line pipe (the inside diameter of the connection on the equipment).	1/4 Inches

Suction Line Size The outside diameter of the suction line (the inside diameter of the connection on the equipment).	3/8 Inches

Indoor Section Size, W x H x D	31 1/8 x 10 7/8 x 8 1/2 Inches

Sound Rating, Indoor The noise produced by the unit rated in decibels. 30dbs is equivalent to a whisper, 60dbs is equivalent to a normal conversation, 90 dbs is equivalent to a lawn mower.	27 / 29 / 33 / 37 / 39 / 42 / 46 Decibels

Sound Rating, Outdoor The noise produced by the unit rated in decibels. 30dbs is equivalent to a whisper, 60dbs is equivalent to a normal conversation, 90 dbs is equivalent to a lawn mower.	52 Decibels

Outdoor Section Size, W x H x D	35 3/8 x 32 5/8 x 13 Inches

Indoor Section Weight	21 Lbs

Outdoor Section Weight	159 Lbs

Voltage	208 / 230 Volts

Frequency	60 Hz

Voltage Phase	1

Compressor Warranty	6 Years

Parts Warranty	2 Years