(800)865-5931 Monday to Friday 8:30 AM - 5:00 PM Central
0
Free Shipping See Details
|
No Sales Tax See Details

SpacePak ESP-4860G

4 to 5 Ton Horizontal High-Velocity Air Handler, R-410A Refrigerant (Heat Pump Compatible)

(0 Reviews)

Services

  • Flat Rate Returns $30
  • Pro Installation
  • Liftgate Delivery $25
  • Shipping to Canada
    SHIPPING TO CANADA

    Canadian tax and shipping fees may be estimated prior to purchasing an item by completing the form below.

    TAXES
    Duties (%): N/A
    Canada Tax (%): N/A
    Brokerage: N/A
    Total taxes: N/A
    Quantity: Postal Code: Calculate Shipping

SpacePak makes it possible to install central heating and cooling in any home or small business, regardless of structure design, age, size or type of construction. SpacePak is an air distribution system which uses a principle known as aspiration - as the air stream enters the room, it creates a gentle mixing of air in the room to provide thorough, comfortable draft-free air circulation. SpacePak eliminates stratification with a minimum floor-to-ceiling temperature difference.

Can be located nearly anywhere -- attics (fits up through 16"-on- center ceiling joist), basements, crawlspaces and garages.

Unit can be installed for horizontal or vertical supply air flow with simple field conversion.

Features:

  • Corrosion resistant cabinet with durable "E-Coat" finish. Fully insulated with 1-1/2 lb. density batt.
  • Six-row copper tube-aluminum fin evaporator coil removes up to 30% more humidity than conventional coil.
  • Blower motor is factory-balanced for vibration-free operation.
  • Primary and secondary drain connections (3/4" FPT) in durable, polyethylene primary drain pan meet International Mechanical Code 307.2.3.
  • Factory supplied primary condensate drain assembly.
  • Factory-assembled, pre-wired control center with high and low voltage terminal blocks, and low voltage transformer. Can be relocated up to 10 feet from unit with optional remote mount kit.
  • Factory-installed anti-frost control and thermal expansion valve. Standard factory-installed primary drain pan float switch. Sweat type suction/liquid line connections.
  • Schrader valve and refrigerant lines extend through end of cabinet.
  • Can be installed with a conventional outdoor condensing unit as long as capacity and refrigerant line connections meet SpacePak recommendations.
  • Shipped with Nitrogen holding charge.

 

Configuration

Configuration is the direction the conditioned air will pass through the unit.

Upflow units will have the air come in from the bottom and blow out the top.

Horizontal units will have the air go through the unit left to right, or right to left.

Downflow units will have the air come in from the top of the unit, and blow out the bottom.

Unsure of what configuration your home needs? Call us at 800-865-5931. Monday through Friday, 8:30am to 5:00pm CST

Configuration
Horizontal
Blower Cooling Capacity

The tonnage of air conditioning that can be moved effectively by the blower. You want to make sure that the blower is appropriately sized for the air conditioner. If it is too small the coil could ice up. If it is too large than the air coming out of the ducts won't be cold enough.

Blower Cooling Capacity
4 / 5 Tons
Nominal CFM

The amount of air that can be moved by the fan, measured in cubic feet per minute (cfm).

Nominal CFM
1,150
Refrigerant

Inside air conditioning systems are liquid/gas refrigerant. There are two types of this refrigerant available for use, R-22 (more commonly known as Freon), and a newer alternative R-410A.

An air conditioning system does not consume refrigerant, but reuses it. As long as there are no leaks in the refrigerant circuit, there is no need to ever add more refrigerant to an air conditioning system.

Although R-22 is an effective refrigerant, if it is released into the atmosphere it can contribute to the depletion of the Earth’s ozone layer. The EPA has mandated the phasing out the use of R-22. It is being replaced by R-410A.

As of 2010, manufacturers are required to make all new air conditioners with R-410A. However, R-22 is still available for sale in existing pre-2010-manufactured equipment, and for use in servicing existing R-22 equipment. By 2020, R-22 will no longer be manufactured, but will still be recycled and available for sale.

Refrigerant
R-410A
Blower Type

There are three main type of blowers: Multi-Speed, High-Efficiency Multi-Speed, and Variable Speed.

Standard Multi-Speed blowers have different speed options and you select the speed that the blower will operate at depending on the function it is performing (ex. different speeds for fan, AC, and heating functions).

High-Efficiency Multi-Speed blowers are designed to maintain a constant torque and in doing so will maintain air-flow and use less electricity.

Variable Speed blowers will adjust their speed during operation. The result is a blower that will run at lower speeds for longer periods of time (this improves the air flow and increases electrical efficiency).

Blower Type
Multi-Speed
Fuel Type
Electricity
Min. Recommended # of Outlets for Higher Tonnage

The minimum recommended number of supply ducts when the air handler is connected to the larger air conditioning option.

Min. Recommended # of Outlets for Higher Tonnage
35 Outlets
Min. Recommended # of Outlets for Lower Tonnage

The minimum recommended number of supply ducts when the air handler is connected to the smaller air conditioning option.

Min. Recommended # of Outlets for Lower Tonnage
28 Outlets
Heat Pump Compatible
Yes
Liquid Line Connection Size

The outside diameter of the liquid line pipe (the inside diameter of the connection on the equipment).

Liquid Line Connection Size
3/8 Inches
Suction Line Connection Size

The outside diameter of the suction line (the inside diameter of the connection on the equipment).

Suction Line Connection Size
7/8 Inches
Return Diameter

The diameter of the appropriate round return duct.

Return Diameter
24 inches
Supply Diameter

The diameter of the appropriate round supply duct.

Supply Diameter
9 inches
Shipping Weight
171 lbs
Width
43 1/8 Inches
Depth
29 3/8 Inches
Height
14 1/8 Inches
Voltage
208 / 230 Volts
Frequency
60 Hz
Voltage Phase
1
Parts Warranty
1 Years

In 2002 Alpine Home Air Products became the first company to sell heating, air conditioning and indoor air-quality products online. We have proudly served hundreds of thousands of customers, helping them save time and money by buying their products direct.