(800)865-5931 Mon-Fri 7am-7pm, Sat 9am-2pm CT
AMERICA'S HEATING & COOLING STORE™
EST. 2002
Home Air Products™
0
Free Shipping See Details
|
No Sales Tax See Details
Enter your zip for personalized product and service recommendations.
YOUR SHOPPING EXPERIENCE IS NOW PERSONALIZED.
Actual product may vary from photos.
The Aspen - Multi-Brand Compatible CC30D44-210L-056 has been discontinued
TRY THIS INSTEAD
Goodman CAPF 2
Goodman CAPF3131C6

2.5 Ton, W 21 x H 22 x D 21, Painted Cased Evaporator Coil


Aspen coils are an excellent choice if you would like a high-quality, inexpensive alternative to name brand evaporator coils. Aspen coils are designed to work with all brands of central air conditioning and heat pump equipment, and many models are AHRI certified for guaranteed efficiency and capacity ratings for brands such as Goodman, Haier and others.

Aspen Manufacturing is one of the largest independent coil manufacturers in the US.  Aspen utilizes state-of-the-art fabrication and assembly equipment to maintain low costs while maintaining the highest possible quality in all their products.  Other manufacturers may achieve high efficiencies by increasing the size and cost of their coils. Not Aspen. Aspen has re-engineered their coils from the inside, tightening fin packs, increasing tube rows, and adding TXV's when necessary.

This coil comes ready for use with R-410A refrigerant systems. The coil can also be used in an R-22 system with a simple 5 minute field conversion, consisting of removing the TXV refrigerant regulator and installing an appropriate sized orifice. The correct orifice size is determined by the outdoor unit. When installing a new outdoor unit (air conditioner or heat pump), the correct orifice is usually supplied with that equipment. If you are installing the indoor coil only in a system with an existing outdoor unit, find the required orifice size in the manufacturer's documentation or use our chart.

Standard Features

  • Rifled copper tubing, and enhanced aluminum fins
  • Immersion-tested at 500 psi, then nitrogen-pressurized and sealed
  • Liquid line - 3/8" ODS, suction line - 7/8" ODS
  • Externally mounted flowrater body with Schrader valve for hiss-testing
  • Heavy duty polypropylene drain pan
  • Cabinets feature furnace connectors
  • Split access doors in front for easy service
  • Fully insulated cabinets with faced insulation
  • Upflow without field modification; downflow applications require installation of included plate kit
  • ARI certified with select Goodman and Haier central air conditioners and heat pumps
  • ETL listed for use with both R-22 and R-410A when proper refrigerant metering device is used (see above)
  • 10 year limited warranty

 Check out some additional installation Tips for Selecting Matched Components and Line Sets to help with your installation project.


Configuration

Configuration is the direction the conditioned air will pass through the unit.

Upflow units will have the air come in from the bottom and blow out the top.

Horizontal units will have the air go through the unit left to right, or right to left.

Downflow units will have the air come in from the top of the unit, and blow out the bottom.

Unsure of what configuration your home needs? Call us at 800-865-5931. Monday through Friday, 8:30am to 5:00pm CST

Configuration
Upflow / Downflow
Cooling Capacity

Not sure what size you need? Feel free to watch an informational video and use our easy sizing calculator.

Cooling Capacity
2.5 Tons
Refrigerant

Inside air conditioning systems are liquid/gas refrigerant. There are two types of this refrigerant available for use, R-22 (more commonly known as Freon), and a newer alternative R-410A.

An air conditioning system does not consume refrigerant, but reuses it. As long as there are no leaks in the refrigerant circuit, there is no need to ever add more refrigerant to an air conditioning system.

Although R-22 is an effective refrigerant, if it is released into the atmosphere it can contribute to the depletion of the Earth’s ozone layer. The EPA has mandated the phasing out the use of R-22. It is being replaced by R-410A.

As of 2010, manufacturers are required to make all new air conditioners with R-410A. However, R-22 is still available for sale in existing pre-2010-manufactured equipment, and for use in servicing existing R-22 equipment. By 2020, R-22 will no longer be manufactured, but will still be recycled and available for sale.

Refrigerant
R-22 / R-410A
Liquid Line Connection Size

The outside diameter of the liquid line pipe (the inside diameter of the connection on the equipment).

Liquid Line Connection Size
3/8 Inches
Suction Line Connection Size

The outside diameter of the suction line (the inside diameter of the connection on the equipment).

Suction Line Connection Size
7/8 Inches
Coil Width
21 inches
Coil Height
24 inches
Coil Depth
21 1/2 inches
Shipping Weight
74 lbs

CONDENSATION CONTROL
DiversiTech ClearVue
DiversiTech IQP-120

120 Volt Condensation Pump with Variable Speed Pump and Floatless Sensor

$57.99 Qty:
DiversiTech ClearVue
DiversiTech IQP-120T

120 Volt Condensation Pump with Variable Speed Pump and Floatless Sensor, and 20' of Drain Tubing

$62.99 Qty:
Rectorseal Safe-T-Switch 2
Rectorseal SS2

Safe-T-Switch® Secondary Drain Line Switch

$11.99 Qty:
SUPPLY AIR PLENUMS
Supply Air Plenum
Alpine PLN122

Supply Plenum 20 x 20 x 30 Inches

$59.99 Qty:
TOOLS
640-UL25
Diversitech 640-UL25

Diversitech 640-UL25 Foil Tape

$17.99 Qty:



Get expert assistance from our team

Call our product specialists at 800-865-5931
Mon-Fri 7am-7pm, Sat 9am-2pm CT

Sal
Jack
Peter
Dan
Russ
Bill

Or ask us here: