(800)865-5931 Mon-Fri 7am-7pm, Sat 9am-2pm CT
AMERICA'S HEATING & COOLING STORE™
EST. 2002
Home Air Products™
28
Free Shipping See Details
|
No Sales Tax See Details
Enter your zip for personalized product and service recommendations.
YOUR SHOPPING EXPERIENCE IS NOW PERSONALIZED.
The Comfort-Aire SMH24SC-1 has been discontinued.
TRY THIS INSTEAD
Please call us for a suitable alternate product.

(800) 865-5931

Mon-Fri 7am-7pm, Sat 9am-2pm CT


Comfort-Aire's "S" Series, rated at 13 SEER, offers economical zone control because only the room or area being used is conditioned.  Also, no energy is used to force air through a duct system.

Since the unit is independent of any other heating or cooling system, specific comfort requirements can be set for the space.  A wireless remote makes it easy to select both temperature and mode.

The indoor air handler features a sleek design that extends just 9" or less into the room, depending on the model.  For installation flexibility, the indoor section can be located up to 82 feet from the outdoor section.

Not only is the air handler visually unobtrusive, it's also so quiet you'll forget it's even there.  Fan speed and mode can be selected so the air flow provides the comfort needed without being disruptive.  All models feature three fan speeds.

Built with many quality components, the system includes a three minute delay at start-up to protect the compressor from short-cycling.

Standard Features

  • Whisper Quiet—High tech fan in the indoor unit delivers balanced air flow
  • Temperature Compensation—Indoor unit adjusts automatically as needed to eliminate stratification between ceiling and floor temperatures
  • Random Swing—Continually adjusts air direction for a gentle, breeze-like effect
  • Multiple Modes—Cooling, dehumidification only, air circulation (heating in heat pump models) plus: Sleep mode, 24-hour timer and turbo mode
  • Auto Operation—Automatically adjusts to maintain a constant temperature/humidity level
  • Air Filtration—An air filter helps trap dust, pollen and other particles in the air; this permanent filter is designed to be washed on a regular basis and re-installed
  • Auto Restart—Reverts to the last setting following a power failure
  • Low Ambient Operation—Crankcase heater allow operation at 5°F (cooling)

Complete your system by selecting a line set from the Accessories tab above.  Line sets come in 15, 35, and 50 foot lengths.

 


Total Cooling Capacity BTU

The total amount of cooling delivered by the system. This number is inclusive of all interior air handlers.

Total Cooling Capacity BTU
23000 BTU
Total Cooling Capacity
2 Ton(s)
Maximum Heating Output BTU

The amount of heat, rated in British Thermal Units (BTUs), that the unit can deliver into the space. Not sure how many BTUs you need? Try our easy Equipment Sizing Estimator.

Maximum Heating Output BTU
24000 BTU
SEER

Seasonal Energy Efficiency Ratio (SEER) is a measure of cooling over an entire season. It is determined by comparing the amount of cooling produced in BTUs in relation to the amount of electricity used. A higher SEER means a system is more energy efficient and would provide comfort at a lower utility cost than a lower SEER system.

SEER
13 SEER
Energy Efficiency Ratio

The measure of air conditioner efficiency at its maximum load

Energy Efficiency Ratio
12.1 EER
Heating Seasonal Performance Factor

A measure of heat pump efficiency while in a heating mode. The higher the number the better the energy efficiency.

Heating Seasonal Performance Factor
7.8 HSPF
Refrigerant

Inside air conditioning systems are liquid/gas refrigerant. There are two types of this refrigerant available for use, R-22 (more commonly known as Freon), and a newer alternative R-410A.

An air conditioning system does not consume refrigerant, but reuses it. As long as there are no leaks in the refrigerant circuit, there is no need to ever add more refrigerant to an air conditioning system.

Although R-22 is an effective refrigerant, if it is released into the atmosphere it can contribute to the depletion of the Earth’s ozone layer. The EPA has mandated the phasing out the use of R-22. It is being replaced by R-410A.

As of 2010, manufacturers are required to make all new air conditioners with R-410A. However, R-22 is still available for sale in existing pre-2010-manufactured equipment, and for use in servicing existing R-22 equipment. By 2020, R-22 will no longer be manufactured, but will still be recycled and available for sale.

Refrigerant
R-410A
Moisture Removal

The amount of water that can be removed from the air rated in pints per hour.

Moisture Removal
5.3 Pts/Hr
Factory Precharge

This unit is charged with enough refrigerant for the condensing unit evaporator coil and the length of line stated. Longer line sets can be used but would require some additional refrigerant for appropriate operation.

Factory Precharge
16.5 Feet
Maximum Fuse/Breaker

The maximum capacity breaker that the unit can be connected to (This is the best option for consistent performance)

Maximum Fuse/Breaker
20 Amps
Wiring Requirement for Indoor Unit

The wiring recommended to connect the outdoor unit to the interior air handler.

Wiring Requirement for Indoor Unit
4 Conductor/ 14 Gauge
Maximum Line Length

The maximum length of line set approved for use with this product.

Maximum Line Length
82 Feet
Maximum Height Difference

The maximum vertical distance between the condensing unit and the air handler.

Maximum Height Difference
32.8 Feet
Line Set Connection Type

There are two main types of connections for HVAC products brazed and flared. Brazed connections are typically used in standard split systems, and flare connections are typically used on mini splits and can be connected using a wrench.

Line Set Connection Type
Flare
ENERGY STAR® Qualified

Products earn the ENERGY STAR label by meeting the energy efficiency requirements set forth in ENERGY STAR specifications. The EPA establishes these specifications based on the following set of principles:

  • Product categories must contribute significant energy savings nationwide.
  • Qualified products must deliver the features and performance demanded by consumers, in addition to increased energy efficiency.
  • If the qualified product costs more than a conventional, less-efficient counterpart, purchasers will recover their investment in increased energy efficiency through utility bill savings, within a reasonable period of time.
  • Energy efficiency can be achieved through broadly available, non-proprietary technologies offered by multiple manufacturers.
  • Product energy consumption and performance can be measured and verified with testing.
  • Labeling would effectively differentiate products and be visible for purchasers.

ENERGY STAR® Qualified
No
Zones

The number of interior air handlers connected to the condensing unit. Typically one, two, or three zones.

Zones
1
Liquid Line Connection Size

The outside diameter of the liquid line pipe (the inside diameter of the connection on the equipment).

Liquid Line Connection Size
3/8 Inches
Suction Line Connection Size

The outside diameter of the suction line (the inside diameter of the connection on the equipment).

Suction Line Connection Size
5/8 Inches
Indoor Section Size, W x H x D
49 3/16 x 12 13/16 x 9 1/16 Inches
Sound Rating, Indoor

The noise produced by the unit rated in decibels. 30dbs is equivalent to a whisper, 60dbs is equivalent to a normal conversation, 90 dbs is equivalent to a lawn mower.

Sound Rating, Indoor
46 / 49 / 52 Decibels
Outdoor Section Size, W x H x D
35 1/4 x 33 7/8 x 13 Inches
Indoor Section Weight
39.7 Lbs
Outdoor Section Weight
143.3 Lbs
Voltage
208 / 230 Volts
Frequency
60 Hz
Voltage Phase
1
Compressor Warranty
5 Years
Parts Warranty
1 Years

ACCESSORIES FOR MINI-SPLIT SYSTEMS
Diversitech 230-B
DiversiTech 230-B3L

Wall Bracket with Easy-Fit™ for Ductless Mini-Split Condensers, 150 lbs Weight Capacity

$93.99 Qty:
Diversitech 230-MB
DiversiTech 230-MB14CW

(2-Pack) 14" Mounting Blocks with End Caps for Ductless Mini-Split Air Conditioner and Heat Pump Condensers

$19.99 Qty:
Diversitech Mini-Split Condenser Pad
DiversiTech EL1838-3

E-Lite 18" x 38" x 3" Mini-Split Condenser Pad

$33.99 Qty:
Yellow Jacket 19173
Yellow Jacket 19173

19173 Adapter 5/16" x 1/4" for Ductless Mini-Split Systems

$17.99 Qty:
AIR BOOSTERS
as1
Tjernlund AS1

75 CFM Room-to-Room Ventilator, 120 VAC Hardwired

$134.99 Qty:
as1
Tjernlund AS1P

75 CFM Room-to-Room Ventilator, 120 VAC Plug-in

$185.99 Qty:
ELECTRICAL DISCONNECT
DiversiTech EDS-60U
Alpine AG-DCT

Safety Non-Fused Electrical Disconnect

$12.99 Qty:
ELECTRICAL WHIPS
Electrical Whip 4
Alpine AG-WHP10

1/2 x 48 Inches, #10 Gauge Electrical Whip

$17.99 Qty:
MINI-SPLIT SYSTEM LINE SETS
Hitachi LS143814-15 Line Set
Alpine 61080150B3B6

15 Foot 5/8 SL 3/8 LL Ductless Mini-Split Line Set

$64.99 Qty:
Hitachi LS143814-15 Line Set
Alpine 61080250B3B6

25 Foot 5/8 SL 3/8 LL Ductless Mini-Split Line Set

$99.99 Qty:
Hitachi LS143814-15 Line Set
Alpine 61080350B3B6

35 Foot 5/8 SL 3/8 LL Ductless Mini-Split Line Set

$124.99 Qty:
Hitachi LS143814-15 Line Set
Alpine 61080500B3B6

50 Foot 5/8 SL 3/8 LL Ductless Mini-Split Line Set

$191.99 Qty:
OUTDOOR LINE SET COVERS
Diversitech 230-CP
DiversiTech 230-CP3

Coupling for 3" SpeediChannel™ Line Set Covers

$2.99 Qty:
SpeediChannel D
DiversiTech 230-D3

78" Long, 3" SpeediChannel™ Line Set Cover

$20.99 Qty:
SpeediChannel D
DiversiTech 230-D3 (6-Pack)

(6-Pack) 78" Long, 3" SpeediChannel™ Line Set Cover

$115.99 Qty:
Diversitech 230-DC
DiversiTech 230-DC3

End Cap for 3" SpeediChannel™ Line Set Covers

$3.99 Qty:
Diversitech 230-DCLIP
DiversiTech 230-DCLIP-10

(10-Pack) SpeediClips™

$5.99 Qty:
Diversitech 230-DE
DiversiTech 230-DE3

End Fitting for 3" SpeediChannel™ Line Set Covers

$4.99 Qty:
Diversitech 230-EB
DiversiTech 230-EB3

90° Inside Elbow for 3" SpeediChannel™ Line Set Covers

$7.99 Qty:
Diversitech 230-EIN
DiversiTech 230-EIN3

90° Outside Elbow for 3" SpeediChannel™ Line Set Covers

$7.99 Qty:
Diversitech 230-FB
DiversiTech 230-FB3

90° Flat Bend for 3" SpeediChannel™ Line Set Covers

$7.99 Qty:
Diversitech 230-FB45
DiversiTech 230-FB453

45° Flat Bend for 3" SpeediChannel™ Line Set Covers

$7.99 Qty:
Diversitech
DiversiTech 230-FJ3

Flex Joint for 3" SpeediChannel™ Line Set Covers

$5.99 Qty:
Diversitech 230-FR
DiversiTech 230-FR3

Flat Wall Escutcheon for 3" SpeediChannel™ Line Set Covers

$3.99 Qty:
Diversitech 230-LFB
DiversiTech 230-LFB3

90° Long Bend for 3" SpeediChannel™ Line Set Covers

$10.99 Qty:
Diversitech 230-WC
DiversiTech 230-WC3

Wall Connection Piece for 3" SpeediChannel™ Line Set Covers

$8.99 Qty:
Diversitech 230-WR
DiversiTech 230-WR3

Non-Flat Wall Escutcheon for 3" SpeediChannel™ Line Set Covers

$4.99 Qty:
Diversitech 230-WS2
DiversiTech 230-WS2

2.5" Wall Sleeve for SpeediChannel™ Line Set Covers

$9.99 Qty:
Slimduct_Kit_White
DiversiTech DSCP-13

Outdoor Line Set Cover Kit, 3" x 2-1/2" - For Basement-Installed System

$46.99 Qty:
Slimduct_Kit_White
DiversiTech DSCP-23

Outdoor Line Set Cover Kit, 3" x 2-1/2" - For Attic-Installed System

$68.99 Qty:



Get expert assistance from our team

Call our product specialists at 800-865-5931
Mon-Fri 7am-7pm, Sat 9am-2pm CT

Sal
Joseph
Matt
Dan
Russ
Bill

Or ask us here: