1.5 to 2.5 Ton Variable Speed Air Handler
1.5 to 2.5 Ton Variable Speed Air Handler
New Item!
Model: Goodman AVPTC183014
highlights
The Goodman® Multi-Position, Variable-Speed Air Handler is suitable for use with refrigerant R-410A (models ending in 14.) The Air Handlers’ blower design includes a variable-speed DC motor to help eliminate the cold blast of air upon heating start-up.
The unit can operate with a heat pump or condenser of two different tonnages, as noted in the product description above.
For Tips for Selecting Matched Components and Line Sets click here.
Standard Features
- Compatible with the ComfortNetTM Communicating System family of products
- R-410A refrigerant compatible
- Factory-installed thermal expansion valves for cooling and heat pump applications
- Variable-speed ECM blower motor
- All-aluminum evaporator coil
- Provides constant CFM over a wide range of static pressure conditions independent of duct system; provides low CFM for efficient fan-only operation
- In non-communicating mode, up to 12 field-selectable airflow settings can be adjusted to optimize the system's CFM for each individual mode of operation
- Auto configuration of the airflow and tonnage in communicating mode
- CFM indicator
- Maximum four low-voltage wires required for operation in communicating mode
- Improved humidity control and comfort
- Compatible with heat pumps and variable-capacity cooling applications
- Multi-position—upflow, downflow or horizontal installations
- Built-in coil has horizontal, vertical, and downflow drain pans with secondary drain connections
- Complies with the Factory-sealed Air Handling Credit with or without field-installed filter kits as listed in the 2001 Florida Building Code, Chapter 13, Section 610.2.A.2.1
- AHRI Certified; ETL Listed
Cabinet Features
- Fully insulated, painted steel cabinet with attractive Architectural Gray finish
- Built-in filter rack for 1” filter (filter not included)
- Low-voltage cabinet connections; control circuit is arranged to permit staging
- Power supply on top; low-voltage entry on top or side
- Factory-sealed to achieve 2% or less leakage rate with or without field-installed filter kits at 1.0” water gauge external duct static pressure
Specs
System Information
Configuration
Downflow / Horizontal / Upflow
Fuel Type
Electricity
Requires Downflow Kit
no
Refrigerant
R-410A
Performance
CFM (Low/High)
(600/1200) CFM
Blower Cooling Capacity
1.5 / 2 / 2.5 Tons
Blower Type
Variable Speed
Electric Heat Capabilities (Optional)
10 / 3 / 5 / 8 Kilowatts
Electrical Information
Frequency
60 Hz
Maximum Overcurrent Protection (Breaker)
15 Amps
Voltage
208 / 230 / 240 Volts
Line Set Information
Liquid Line Size (OD)
3/8 Inches
Suction Line Size (OD)
3/4 Inches
Product Dimensions
Width
19 1/2 Inches
Depth
22.000000000 Inches
Height
46 3/4 Inches
Shipping Weight
127 lbs
Important Measurements
Supply Air Opening Size
11 x 17.5 Inches
Return Air Opening Size
17 1/8 w x 17 15/16 d inches
Warranty
Warranty
10 (with online registration) years
Parts Warranty
10 Years
Documents
- Goodman Air Handler & Coil Brochure(PDF, 977 KB)
- Goodman AVPTC Series Installation Instructions(PDF, 489 KB)
- Goodman AVPTC Series Spec Sheet(PDF, 729 KB)
- Goodman AVPTC Series Technical Information(PDF, 162 KB)
Reviews
Let's Talk
Get expert assistance from our team
Call our product specialists at: (800) 865-5931
Open Now