(800)865-5931 Mon-Fri 7am-7pm, Sat 9am-2pm CT
EST. 2002
Home Air Products™
Free Shipping See Details
No Sales Tax See Details
Enter your zip for personalized product and service recommendations.
The Alpine AHDGAA090 has been discontinued.
Please call us for a suitable alternate product.

(800) 865-5931

Mon-Fri 7am-7pm, Sat 9am-2pm CT

The following Item(s) are immediately available from our Scratch-N-Dent Inventory.
Please view the items for specific descriptions and photographs.

The AHDGAA 80% AFUE single-stage, downflow, mobile home furnace is made by Coleman and features an aluminized steel heat exchanger, and a built in cabinet for easy addition of an air conditioning evaporator coil. It is great for installations in closets or alcoves, requiring only 2 inches of clearance on the top, no clearance on the sides or rear of the unit, and a small clearance for service on the front (2 inches for closet installations and 24 inches in an alcove).

Note: When replacing a mobile home gas furnace, replace the roof jack as well. Click the Accessories tab or “Buy Now” to view roof jacks and other accessories that fit this furnace.

Please read this Important Safety Notice.


  • Extremely quiet starting and operation
  • Sealed Combustion, (combustion air drawn through the roof jack and pushed into the burner box. Flue gas is forced from the heat exchanger by the vent blower and discharged through the flue pipe to the outside atmosphere)
  • Automatic hot surface igniter
  • Aluminized steel heat exchanger
  • Built-in evaporator coil cabinet
  • LP (propane) conversion kit provided with furnace, no other parts required
  • High altitude kit not required - derating accomplished by reducing the orifice size (Please call for assistance with selecting proper orifice.)
  • Warranty: 10 years heat exchanger / 2 years parts / 2 years labor

THESE FURNACES MUST BE INSTALLED WITH A NEW MATCHING ROOF JACK (EXHAUST VENT) FOR SAFETY REASONS. Using the wrong roof jack could result in an explosion. You cannot use a roof jack from an older model furnace or a different brand of mobile home furnace. Please click the 'Accessories' tab above to view roof jacks for this furnace.


Configuration is the direction the conditioned air will pass through the unit.

Upflow units will have the air come in from the bottom and blow out the top.

Horizontal units will have the air go through the unit left to right, or right to left.

Downflow units will have the air come in from the top of the unit, and blow out the bottom.

Unsure of what configuration your home needs? Call us at 800-865-5931. Monday through Friday, 8:30am to 5:00pm CST

Blower Cooling Capacity

The tonnage of air conditioning that can be moved effectively by the blower. You want to make sure that the blower is appropriately sized for the air conditioner. If it is too small the coil could ice up. If it is too large than the air coming out of the ducts won't be cold enough.

Blower Cooling Capacity
4 Tons
Maximum Input BTU

The maximum amount of heat that the unit can produce. The amount delivered into the space will be the input minus the efficiency loss also know as the output. For example a 100000 btu furnace at 80% efficiency will give you 80000 out btus of heat. The same size furnace at 95% will give you 95000 btus of heat.

Maximum Input BTU
90000 BTU
Maximum Heating Output BTU

The amount of heat, rated in British Thermal Units (BTUs), that the unit can deliver into the space. Not sure how many BTUs you need? Try our easy Equipment Sizing Estimator.

Maximum Heating Output BTU
72000 BTU
Efficiency (% AFUE)

The percentage of energy converted into output by the unit. The remaining percentage is lost during the conversion process. The higher the efficiency, the lower the operational cost.

Efficiency (% AFUE)
80 %
Blower Type

There are three main type of blowers: Multi-Speed, High-Efficiency Multi-Speed, and Variable Speed.

Standard Multi-Speed blowers have different speed options and you select the speed that the blower will operate at depending on the function it is performing (ex. different speeds for fan, AC, and heating functions).

High-Efficiency Multi-Speed blowers are designed to maintain a constant torque and in doing so will maintain air-flow and use less electricity.

Variable Speed blowers will adjust their speed during operation. The result is a blower that will run at lower speeds for longer periods of time (this improves the air flow and increases electrical efficiency).

Blower Type
Maximum Overcurrent Protection (Breaker)

The maximum capacity breaker in the building's circuit panel that can be used on the dedicated electrical line supplying the equipment.

Maximum Overcurrent Protection (Breaker)
15 Amps
Fuel Type
Liquid Propane / Natural Gas
Roof Jack Size
10 Inch Diameter
Product Weight
159 lbs
Meets CSA Standards

Canadian Standards Association

Meets CSA Standards
Meets Canadian OEE Standards

Standards established by Canada's Office of Energy Efficiency.

Meets Canadian OEE Standards
19 1/2 Inches
24 1/2 Inches
76 Inches
Heat Exchanger Warranty
10 Years
Parts Warranty
2 Years
Labor Warranty
2 Years