Place Your Order by 1 pm for Same-Day Shipping

America's Heating & Cooling Store, Est 2002
Free Shipping
See Details
My Location:
Chicago, IL

60,000 BTU Furnace, 80% Efficiency, Single-Stage Burner, 1,200 CFM Multi-Speed Blower, Downflow Application

60,000 BTU Furnace, 80% Efficiency, Single-Stage Burner, 1,200 CFM Multi-Speed Blower, Downflow Application

Model: Goodman GDS80603AN

highlights
view information

This is a Downflow unit. Learn about Downflow

view information

To use LP fuel, this unit requires an LP Conversion Kit. See Accessories

The Goodman GDS80603AN is a 3 ton single-stage, multi-speed gas furnace. This means you get comfort and cost savings from this energy saving furnace. Set the multi-speed motor to operate at the level most comfortable for you and your home. This furnace has a rating of up to 80% AFUE (Annual Fuel Utilization Efficiency), meaning that 80 cents of every dollar of heating energy expense heats your home, compared to some older central heating systems which can be rated at only 60% AFUE.

The Goodman GDS8 dedicated downflow (blows air into ducts located below it) gas furnaces features a patented aluminized steel tubular heat exchanger and high-efficiency hot surface ignition system. These furnaces are run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked enamel finish, these gas heaters can be installed in a utility room, closet, alcove, basement or attic. (Not intended for use in mobile homes.)

Important Safety Notice

Features

  • Operates as a natural gas furnace out of the box, and can be easily converted to a propane furnace with optional propane conversion kit (see Accessories tab).
  • Corrosion-resistant, aluminized-steel furnace tubular heat exchanger
  • Designed for dedicated downflow installations
  • Energy-saving, reliable furnace hot surface ignition system with patented adaptive learning algorithm to maximize igniter life
  • Aluminized furnace steel inshot burners
  • Energy-saving PSC, multi-speed, direct drive furnace blower motor
  • Heater has quiet, corrosion-resistant induced draft blower assembly
  • Integrated furnace control with diagnostics
  • Low voltage terminal blocks
  • Multiple flame roll-out switches, blower door safety switch, outlet air-limit switch and pressure switch for proof of combustion air
  • 40VA transformer for heating and air conditioning control service
  • Combination redundant furnace gas valve and regulator
  • A rotating combustion air blower (Goodman GMS8) that provides the option of venting the furnace through the top, right-hand side or left-hand side
  • Completely assembled, factory run-tested furnace for heating or combination heating/cooling application
  • Specific Goodman furnace models comply with California NOx Standards (models that end in "X") 
  • Heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-enamel finish
  • Attractive architectural gray paint finish
  • Foil-face insulation lines the furnaces' heat exchanger compartment
  • Coil and furnace fit flush for easy installation
  • Convenient left or right connection for gas and electric service
  • This gas furnace has removable, solid-bottom block off

 

Outstanding Warranty Protection

This furnace is covered by what we believe to be one of the best warranties in the indoor home comfort industry. In addition to covering the heat exchanger with a Lifetime Limited Warranty to the original, registered homeowner, if the heat exchanger fails during the first 10 years of ownership, we will replace the entire unit for as long as you own your home. This furnace also has a 10-Year Limited Parts Warranty on all functional parts. For a full description of all warranties applicable to this product, please review the consumer brochure or product warranty in the Documents section.

Specs
System Information
view information
Configuration
Downflow
view information
Fuel Type
LP Capable (Kit Required) / Natural Gas
Efficiency
view information
Efficiency (% AFUE)
80 %
Performance
view information
Maximum Input BTU
60000 BTU
view information
Maximum Heating Capacity
48000 BTU
view information
Maximum CFM
1176 @ 0.5
view information
Blower Cooling Capacity
1.5 / 2 / 2.5 / 3 Tons
view information
Blower Type
Multi-Speed
view information
Burner Stages
Single
Electrical Information
view information
Frequency
60 Hz
view information
Voltage Phase
1
view information
Maximum Overcurrent Protection (Breaker)
15 Amps
view information
Voltage
120 Volts
Product Dimensions
view information
Width
14.000000000 Inches
view information
Depth
28.000000000 Inches
view information
Height
33 3/8 Inches
view information
Cabinet/Chassis Size
A
Product Weight
130 lbs
Shipping Weight
130 lbs
Important Measurements
view information
Vent Connection
4 Inches
view information
Supply Air Opening Size
12 1/2 x 19 5/8 Inches
view information
Flue Pipe Diameter
4
Warranty
view information
Heat Exchanger Warranty
Lifetime
view information
Parts Warranty
10 Years
Certifications
view information
California Approved Furnace
No
view information
Ultra-Low NOx
No
view information
Qualifies for Govt. Money
No
view information
ENERGY STAR® Certified
No
Reviews
Let's Talk
Get expert assistance from our team
Call our product specialists at: (800) 865-5931
Sun 10am-3pm, Mon-Fri 7am-7pm, Sat 10am-4pm CT
© Copyright 2002-2024, Alpine Home Air Products
Privacy Policy