(800)865-5931 Monday to Friday 7:00 AM - 7:00 PM Central
0
Free Shipping See Details
|
No Sales Tax See Details

This Comfort-Aire SMH24SA-1 (Item No. 6326) has some cosmetic damage incurred during shipping. For detailed photos please click 'See Additional Images' above. This Comfort-Aire SMH24SA-1 (Item No. 6326) meets the full manufacturer's specifications, comes with the full manufacturer's warranty, and includes Alpine's premium guarantee.

For product specs and photographs of product in its original condition, click here.

 The Comfort Aire wall mounted ductless mini-split heat pump systems (heating and cooling) are designed to be whisper quiet. The design keeps operational sound outside with the condenser while the indoor air handler remains much quieter. The sleek appearance of the indoor air handler blends with any decor. These systems are ideal for locations where it is too expensive or impractical to install ductwork, or where window air conditioning units cannot be used. They are easily installed in bedrooms, sun rooms, offices, arena skyboxes, and historical buildings.

Features

  • Whisper-quiet operation
  • Attractive wireless remote control
  • Dehumidification mode reduces water vapor
  • "SLEEP" mode provides suitable sleeping environment
  • Timer which can be used to save energy
  • Auto operation adjusts fan and mode to maintain the selected room temperature
  • Three minute time delay at start protects the compressor from short cycling
  • Auto restart reverts to programmed setting after a power failure
  • Uses environmentally friendly R-410A refrigerant
  • Simple installation requiring a hole in the wall less than 3 inches in diameter for connections between the indoor and outdoor sections
  • Hot start prevents discharge of cold air during heat mode.

 

(Note: These heat pumps will not operate in heating mode when outdoor temperature is below 19.5 F degrees.)


Complete your system by selecting a line set from the "Accessories" tab above.  Line sets come in 15 foot, 35 foot, and 50 foot lengths.

Total Cooling Capacity BTU

The total amount of cooling delivered by the system. This number is inclusive of all interior air handlers.

Total Cooling Capacity BTU
24,000 BTU
Heating Capacity

The amount of heat, rated in BTUs that the item can produce.

Heating Capacity
24,000 BTU
Heating Seasonal Performance Factor

A measure of heat pump efficiency while in a heating mode. The higher the number the better the energy efficiency.

Heating Seasonal Performance Factor
7.7 HSPF
Refrigerant

Inside air conditioning systems are liquid/gas refrigerant. There are two types of this refrigerant available for use, R-22 (more commonly known as Freon), and a newer alternative R-410A.

An air conditioning system does not consume refrigerant, but reuses it. As long as there are no leaks in the refrigerant circuit, there is no need to ever add more refrigerant to an air conditioning system.

Although R-22 is an effective refrigerant, if it is released into the atmosphere it can contribute to the depletion of the Earth’s ozone layer. The EPA has mandated the phasing out the use of R-22. It is being replaced by R-410A.

As of 2010, manufacturers are required to make all new air conditioners with R-410A. However, R-22 is still available for sale in existing pre-2010-manufactured equipment, and for use in servicing existing R-22 equipment. By 2020, R-22 will no longer be manufactured, but will still be recycled and available for sale.

Refrigerant
R-410A
Minimum Ampacity
14 Amps
Maximum Fuse/Breaker

The maximum capacity breaker that the unit can be connected to (This is the best option for consistent performance)

Maximum Fuse/Breaker
15 Amps
Wiring Requirement for Indoor Unit

The wiring recommended to connect the outdoor unit to the interior air handler.

Wiring Requirement for Indoor Unit
4 Conductor / 16 Gauge
Maximum Line Length

The maximum length of line set approved for use with this product.

Maximum Line Length
50 Feet
Maximum Height Difference

The maximum vertical distance between the condensing unit and the air handler.

Maximum Height Difference
25 Feet
Line Set Connection Type

There are two main types of connections for HVAC products brazed and flared. Brazed connections are typically used in standard split systems, and flare connections are typically used on mini splits and can be connected using a wrench.

Line Set Connection Type
Flare
Liquid Line Connection Size

The outside diameter of the liquid line pipe (the inside diameter of the connection on the equipment).

Liquid Line Connection Size
3/8 Inches
Suction Line Connection Size

The outside diameter of the suction line (the inside diameter of the connection on the equipment).

Suction Line Connection Size
5/8 Inches
Drain Tubing Connection
1/2 inches (I.D.)
Indoor Section Size, W x H x D
49.2 x 12.8 x 9.1 Inches
Outdoor Section Size, W x H x D
35.2 x 33.9 x 13 Inches
Indoor Section Weight
55 Lbs
Outdoor Section Weight
160 Lbs
Voltage
208 / 230 Volts
Compressor Warranty
5 Years
Parts Warranty
1 Years

In 2002 Alpine Home Air Products became the first company to sell heating, air conditioning and indoor air-quality products online. We have proudly served hundreds of thousands of customers, helping them save time and money by buying their products direct.