Our site works best with Javascript enabled.

AMERICA'S HEATING & COOLING STORE.™
Need Help? Call
800-865-5931
MON-FRI 8:30am-5:00pm Central
Alpine AHOVA-24H-M13H (Item No. 607233)
2 Ton, 13 SEER Heat Pump, For R-22 Refrigerant Use (Unit is Uncharged)



Product has been discontinued.
Please call us for a suitable alternate product.

800-865-5931
Mon - Fri 8:30am - 5:00pm Central
Installation Video Included

This Alpine AHOVA-24H-M13H 2 Ton, 13 SEER Heat Pump, For R-22 Refrigerant has some minor cosmetic damage incurred during shipping. For detailed photos please click 'See Additional Images' above. This Alpine AHOVA-24H-M13H 2 Ton, 13 SEER Heat Pump, For R-22 Refrigerant meets the full manufacturer's specifications, comes with the full manufacturer's warranty, and includes Alpine's premium guarantee.

For product specs and photographs of product in its original condition, click here.

The Alpine AHOVA-H 13 SEER Series heat pump is made by Midea and is the outdoor air conditioning element in a versatile climate-control system designed to create perfect comfort.  It is exceptionally well constructed and features built in high and low pressure safety shut-off switches, components normally found only in high-end equipment.  This multi-functional, high-efficiency system meets all of your needs while offering industry-leading quality and unmatched value.

This heat pump requires an indoor air handler or evaporator coil as part of a complete system. The coil or air handler you should use depends on two factors about the condenser: the tonnage, and the efficiency rating ("SEER"). Usually, high efficiency condensers require a larger tonnage coil than the tonnage of the condenser. For example, a 2 ton 16 SEER condenser might be paired with a 3 ton evaporator coil. To find the specific coils and air handlers that are recommended by the manufacturer for this condenser, check the Accessories tab above. Also, you can view the manufacturer's specifications sheets at the Documents tab above.

Some models of condensers include an orifice (also called "flow rater" or "piston") in a small bag taped to the side of the condenser. If the condenser you purchase includes this orifice, you will need to replace the orifice already inside the evaporator coil or air handler you purchase with this orifice included with the condenser. Doing so makes the condenser and evaporator coil compatible. You can view this step-by-step guide to see how to easily change the orifice.

If you are installing a heat pump with a backup heat source which will be a fuel furnace, you will need to install a thermostat like the Honeywell VisionPro 8000 (TH8320U 1008) thermostat.  This thermostat switches between the two heat sources as needed and prevents both the heat pump and backup heat from running at the same time. 

Need help putting a complete system together?Use our easy System Selector and we’ll do it for you!

Please note that this equipment uses liquid refrigerant and that by federal law you must be EPA certified to handle the refrigerant. You can purchase this equipment without being certified, and if you are mechanically inclined you can perform about 90% of the equipment installation yourself. However, you must have a professional heating/cooling contractor do the final part of the installation which requires managing the refrigerant.

For Tips for Selecting Matched Components and Line Sets click here.

 Features:

  • High / low pressure switch
  • Temperature sensor
  • Factory-installed discharge muffler - helps insure quiet and stable operation
  • Low-pressure service valve - provides easy access for service and installation
  • Factory-installed accumulator - protects the compressor against liquid slugging
  • Crankcase heater - protects compressor from low ambient temperatures or refrigerant migration
  • High condenser coil temperature protection (127° F)
  • High-quality condenser coils with inner-groove copper pipe and high-efficiency aluminum fin absorbs condensation water for maximum heat exchange
  • Anti-rust - painted galvanized steel cabinet, 1000 hours salt spray test
  • Operating ambient temperature range: 14-109° F

 

Cooling Capacity
24000 BTU 

Cooling Capacity
2 Tons 

Maximum Heating Output BTU
24000 BTU 

SEER
13 SEER 

Refrigerant
R-22  

Maximum Overcurrent Protection (Breaker)
20 Amps 

Compressor Type
Rotary  

Low Pressure Safety Switch
Yes  

Liquid Line Connection Size
3/8 Inches 

Suction Line Connection Size
3/4 Inches 

Noise Level
59 Decibels 

Pad Size
24x24 Inches 

Width
23 5/8 Inches 

Depth
23 5/8 Inches 

Height
24 15/16 Inches 

Voltage
208 / 230 Volts 

Frequency
60 Hz 

Voltage Phase
1  

Compressor Warranty
5 Years  

Parts Warranty
5 Years 
Your Order
Ways to Order
See Order Status
Returns
Modify or Cancel Order
Missing Order Item
Damaged Shipments
Warranty Claims
Quotes
View Quotes
Request Custom Equipment
Technical Support
Learning Center
Instruction Manuals
Contact Technical Support
Policies
Shipping Policy
Return Policy
Scratch-N-Dent Policy
Volume Discount Policy
Privacy Policy
Website Terms of Use
Alpine
About Us
Customer Reviews
  Phone
(800) 865-5931
Monday to Friday
8:30am - 5:00pm Central
  Mailing Address
1901 N. Clybourn Avenue
Suite 200
Chicago, IL 60614
  Email
[email protected]
or Contact Us Here
  Fax
(425) 928-2455
© Copyright 2002-2014, Alpine Home Air Products. All Rights Reserved. A Todd Arthurs Company, Inc