(800)865-5931 Mon-Fri 7am-7pm, Sat 9am-2pm CT
EST. 2002
Home Air Products™
Free Shipping See Details
No Sales Tax See Details
Enter your zip for personalized product and service recommendations.
Actual product may vary from photos.

Comfort-Aire HAGV60-00-1A

5 Ton Multi-Positional Variable Speed Air Handler


The HAGV Series uses an ECM (Electronically Commutated Motor) to run the blower. These brushless DC motors with built-in inverters are ultra-high efficiency for lower operating costs. They are also quieter than PSC motors.


  • Multi-Position Design: Ships upflow, horizontal-left and can be easily converted to horizontal-right airflow without additional parts
  • Drain Pan Flexibility: Durable, non-corrosive drain pans have primary and 3/4" secondary openings for right or left connections, meets ASHRAE standard for IAQ
  • Factory Installed A-Coil: Units are A/C ready with installed coil equipped with R-410A thermal expansion valve
  • Blower Time Delay Relay: Increases cooling efficiency.
  • Cabinet Insulation: Reduces blower motor noise
  • Installation Convenience: Can be installed with zero clearance to combustible materials (30" front clearance required for maintenance)
  • Durable Cabinet: 22 gauge galvanized steel cabinet for maximum corrosion protection
  • Electric Heat: Heater kits are available for all HAGV models


Configuration is the direction the conditioned air will pass through the unit.

Upflow units will have the air come in from the bottom and blow out the top.

Horizontal units will have the air go through the unit left to right, or right to left.

Downflow units will have the air come in from the top of the unit, and blow out the bottom.

Unsure of what configuration your home needs? Call us at 800-865-5931. Monday through Friday, 8:30am to 5:00pm CST

Horizontal / Upflow
Blower Cooling Capacity

The tonnage of air conditioning that can be moved effectively by the blower. You want to make sure that the blower is appropriately sized for the air conditioner. If it is too small the coil could ice up. If it is too large than the air coming out of the ducts won't be cold enough.

Blower Cooling Capacity
5 Tons
CFM (Low/High)
(1600/1800) CFM
Electric Heat Capabilities (Optional)

One kilowatt equals 3,400 BTU's of heat (British Thermal Units).

Electric Heat Capabilities (Optional)
10 / 15 / 20 / 5 Kilowatts

Inside air conditioning systems are liquid/gas refrigerant. There are two types of this refrigerant available for use, R-22 (more commonly known as Freon), and a newer alternative R-410A.

An air conditioning system does not consume refrigerant, but reuses it. As long as there are no leaks in the refrigerant circuit, there is no need to ever add more refrigerant to an air conditioning system.

Although R-22 is an effective refrigerant, if it is released into the atmosphere it can contribute to the depletion of the Earth’s ozone layer. The EPA has mandated the phasing out the use of R-22. It is being replaced by R-410A.

As of 2010, manufacturers are required to make all new air conditioners with R-410A. However, R-22 is still available for sale in existing pre-2010-manufactured equipment, and for use in servicing existing R-22 equipment. By 2020, R-22 will no longer be manufactured, but will still be recycled and available for sale.

Blower Type

There are three main type of blowers: Multi-Speed, High-Efficiency Multi-Speed, and Variable Speed.

Standard Multi-Speed blowers have different speed options and you select the speed that the blower will operate at depending on the function it is performing (ex. different speeds for fan, AC, and heating functions).

High-Efficiency Multi-Speed blowers are designed to maintain a constant torque and in doing so will maintain air-flow and use less electricity.

Variable Speed blowers will adjust their speed during operation. The result is a blower that will run at lower speeds for longer periods of time (this improves the air flow and increases electrical efficiency).

Blower Type
Variable Speed
Fuel Type
Liquid Line Connection Size

The outside diameter of the liquid line pipe (the inside diameter of the connection on the equipment).

Liquid Line Connection Size
3/8 Inches
Suction Line Connection Size

The outside diameter of the suction line (the inside diameter of the connection on the equipment).

Suction Line Connection Size
7/8 Inches
Supply Air Opening Size

The dimensions of the opening that the air is discharged through. This is the section where you would attach the supply plenum.

Supply Air Opening Size
23.35 x 21.25 Inches
Return Air Opening Size

The dimensions of the opening where the air is recirculated back into the unit

Return Air Opening Size
23.35 x 19.25 inches
Shipping Weight
213 lbs
24 1/2 Inches
21 3/4 Inches
58 3/4 Inches
208 / 230 / 240 Volts
60 Hz
Limited Warranty
12 Years
Parts Warranty
5 Years