There are three main type of blowers: Multi-Speed, High-Efficiency Multi-Speed, and Variable Speed.

Standard Multi-Speed blowers have different speed options and you select the speed that the blower will operate at depending on the function it is performing (ex. different speeds for fan, AC, and heating functions).

High-Efficiency Multi-Speed blowers are designed to maintain a constant torque and in doing so will maintain air-flow and use less electricity.

Variable Speed blowers will adjust their speed during operation. The result is a blower that will run at lower speeds for longer periods of time (this improves the air flow and increases electrical efficiency).

Maximum Input BTU The maximum amount of heat that the unit can produce. The amount delivered into the space will be the input minus the efficiency loss also know as the output. For example a 100000 btu furnace at 80% efficiency will give you 80000 out btus of heat. The same size furnace at 95% will give you 95000 btus of heat.	80000 BTU

Maximum Heating Output BTU Learn More The amount of heat, rated in British Thermal Units (BTUs), that the unit can deliver into the space. Not sure how many BTUs you need? Try our easy Equipment Sizing Estimator.	64000 BTU

Maximum CFM The maximum amount of air that the blower can push. Rated in Cubic feet per minute or CFM.	1960 @ 0.5

Efficiency Learn More The percentage of energy converted into output by the unit. The remaining percentage is lost during the conversion process. The higher the efficiency, the lower the operational cost.	80 % AFUE

Blower Cooling Capacity Learn More The tonnage of air conditioning that can be moved effectively by the blower. You want to make sure that the blower is appropriately sized for the air conditioner. If it is too small the coil could ice up. If it is too large than the air coming out of the ducts won't be cold enough.	3 / 3.5 / 4 / 5 Tons

Blower Type Learn More There are three main type of blowers: Multi-Speed, High-Efficiency Multi-Speed, and Variable Speed. Standard Multi-Speed blowers have different speed options and you select the speed that the blower will operate at depending on the function it is performing (ex. different speeds for fan, AC, and heating functions). High-Efficiency Multi-Speed blowers are designed to maintain a constant torque and in doing so will maintain air-flow and use less electricity. Variable Speed blowers will adjust their speed during operation. The result is a blower that will run at lower speeds for longer periods of time (this improves the air flow and increases electrical efficiency).	Multi-Speed

Configuration Learn More The direction in which the treated air is blowing out of the unit.	Horizontal / Upflow

Maximum Overcurrent Protection (Breaker) The maximum capacity breaker in the building's circuit panel that can be used on the dedicated electrical line supplying the equipment.	15 Amps

Fuel Type	Liquid Propane Convertible / Natural Gas

Vent Connection The diameter of the vent connection on the furnace.	4 Inches

Supply Air Opening Size The dimensions of the opening that the air is discharged through. This is the section where you would attach the supply plenum.	19.5 x 19.5 Inches

Weight	163 lbs

Meets CSA Standards Canadian Standards Association	Yes

Meets Canadian OEE Standards Standards established by Canada's Office of Energy Efficiency.	No

California Approved LoNox feature meets State of California emissions requirements.	Yes

Width	21 Inches

Depth	28 Inches

Height	33 3/8 Inches

Voltage	120 Volts

Frequency	60 Hz

Voltage Phase	1

Heat Exchanger Warranty	Lifetime

Parts Warranty	10 Years