(800)865-5931 Monday to Friday 8:00 AM - 5:00 PM Central
0
Free Shipping See Details
|
No Sales Tax See Details

Compare Items

Please feel free to compare as many items as you would like. There is no limit to what you can compare.

Additonally, if you have questions while comparing products please do not hesitate to contact us with any question you may have.

(800) 865-5931

  • Configuration

    Configuration is the direction the conditioned air will pass through the unit.

    Upflow units will have the air come in from the bottom and blow out the top.

    Horizontal units will have the air go through the unit left to right, or right to left.

    Downflow units will have the air come in from the top of the unit, and blow out the bottom.

    Unsure of what configuration your home needs? Call us at 800-865-5931. Monday through Friday, 8:30am to 5:00pm CST

    Configuration
  • Blower Cooling Capacity

    The tonnage of air conditioning that can be moved effectively by the blower. You want to make sure that the blower is appropriately sized for the air conditioner. If it is too small the coil could ice up. If it is too large than the air coming out of the ducts won't be cold enough.

    Blower Cooling Capacity
  • Maximum Input BTU

    The maximum amount of heat that the unit can produce. The amount delivered into the space will be the input minus the efficiency loss also know as the output. For example a 100000 btu furnace at 80% efficiency will give you 80000 out btus of heat. The same size furnace at 95% will give you 95000 btus of heat.

    Maximum Input BTU
  • Minimum Input BTU

    The amount of heat produced by the unit at the lower stage of heat. Having two stages of heat will allow for more consistent operation and greater comfort in the home.

    Minimum Input BTU
  • Minimum Output BTU

    The amount of heat delivered into the space on the lower stage of heat. This number is the minimum heat input minus the efficiency loss.

    Minimum Output BTU
  • Maximum CFM

    The maximum amount of air that the blower can push. Rated in Cubic feet per minute or CFM.

    Maximum CFM
  • Hot Water Capacity Range

    The gallons per minute of hot water that the unit is rated to provide. The actual amount of hot water generated can vary depending on your ground water temperature.

    Hot Water Capacity Range
  • Efficiency (% AFUE)

    The percentage of energy converted into output by the unit. The remaining percentage is lost during the conversion process. The higher the efficiency, the lower the operational cost.

    Efficiency (% AFUE)
  • Thermal Efficiency

    The percentage of the heat generated by combustion that goes into heating. The remaining percentage goes out the flue. The higher the efficiency rating, the lower the cost of operation.

    Thermal Efficiency
  • Maximum Overcurrent Protection (Breaker)

    The maximum capacity breaker in the building's circuit panel that can be used on the dedicated electrical line supplying the equipment.

    Maximum Overcurrent Protection (Breaker)
  • Power Source
  • Fuel Type
  • Ignition Type
  • Connection Type
  • Energy Factor
  • Temperature Range

    The minimum and maximum temperatures on the thermostat.

    Temperature Range
  • ENERGY STAR® Qualified

    Products earn the ENERGY STAR label by meeting the energy efficiency requirements set forth in ENERGY STAR specifications. The EPA establishes these specifications based on the following set of principles:

    • Product categories must contribute significant energy savings nationwide.
    • Qualified products must deliver the features and performance demanded by consumers, in addition to increased energy efficiency.
    • If the qualified product costs more than a conventional, less-efficient counterpart, purchasers will recover their investment in increased energy efficiency through utility bill savings, within a reasonable period of time.
    • Energy efficiency can be achieved through broadly available, non-proprietary technologies offered by multiple manufacturers.
    • Product energy consumption and performance can be measured and verified with testing.
    • Labeling would effectively differentiate products and be visible for purchasers.

    ENERGY STAR® Qualified
  • Piping Connections - Water
  • Depth
  • Height
  • Supply Air Opening Size

    The dimensions of the opening that the air is discharged through. This is the section where you would attach the supply plenum.

    Supply Air Opening Size
  • Width
  • Product Weight
  • Heat Exchanger Warranty
  • Parts Warranty
  • Meets CSA Standards

    Canadian Standards Association

    Meets CSA Standards
  • Meets Canadian OEE Standards

    Standards established by Canada's Office of Energy Efficiency.

    Meets Canadian OEE Standards
  • California Approved

    LoNox feature meets State of California emissions requirements.

    California Approved
  • Downflow
  • 3 Tons
  • -
  • 59,000 BTU
  • 48,000 BTU
  • 1,305 @ 0.5
  • -
  • 80 %
  • -
  • 20 Amps
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • 28 1/2 Inches
  • 40 Inches
  • 20 x 12.25 Inches
  • 14 1/2 Inches
  • 125 lbs
  • 1 Year
  • 1 Years
  • Yes
  • No
  • No
  • -
  • -
  • 150,000 BTU
  • 15,000 BTU
  • -
  • -
  • 0.6 - 6.3 GPM
  • -
  • 83 %
  • -
  • 120 VAC (60Hz)
  • Natural Gas
  • Direct Ignition
  • NPT (Threaded)
  • 0.82
  • 140 - 98 °F
  • Yes
  • 3/4 Inch(es)
  • 9 4/5 Inches
  • 25 2/5 Inches
  • -
  • 14 Inches
  • 46 lbs
  • 12 Years
  • 5 Years
  • Yes
  • -
  • -

In 2002 Alpine Home Air Products became the first company to sell heating, air conditioning and indoor air-quality products online. We have proudly served hundreds of thousands of customers, helping them save time and money by buying their products direct.