(800)865-5931 Mon-Fri 7am-7pm, Sat 9am-2pm CT
AMERICA'S HEATING & COOLING STORE™
EST. 2002
Home Air Products™
467
My Location: Ashburn, VA [Change]
|
Free Shipping See Details
|
No Sales Tax See Details
Enter your zip for personalized product and service recommendations.
YOUR SHOPPING EXPERIENCE IS NOW PERSONALIZED.

Fantech SER2004

Energy Recovery Ventilator (With Moisture Transfer) - For Homes Up To 4,200 Sq Ft

(1 Review)

Services


Introducing the NEW SER series of Energy Recovery Ventilators (ERV) by Fantech. As with previous designs, incoming fresh outdoor air is filtered before it is heated by the stale outgoing air through an enthalpy energy recovery core. The ERV then distributes the fresh filtered air throughout the home by direct ductwork installed specifically for the ERV or through the ductwork of a forced-air system.

The climate conditions where you live will determine whether you need a Heat Recovery Ventilator or an Energy Recovery Ventilator. HRV's are usually recommended for colder climates with longer heating seasons. ERV's are used for warmer, more humid climates with long cooling seasons. Please see our helpful reference map to assist in selecting the right unit for you.

New Features

  • Compact Design
  • Electrostatic Filters (washable)
  • Balancing Dampers Included In Installation Kit (not factory installed)
  • External Screw Type Dry Contacts For Push Button Timers (RTS 2), Dehumidistats (MDEH 1), Crank Timer (FD 30M) & EDF5 (5MR) Intellitek control.
  • Easy Core Guide Channels For Removing Core


Standard Features

  • Simple Yet Sophisticated Design Makes These Units the Most Reliable ERVs on the Market
  • Enthalpy Core
  • EBM Motors with Backward Incline Propellers
  • Steep Fan Curves for Superior Airflow Performance
  • No Balancing Required
  • Insulated with 1" (25mm) Foil-Faced High Density Polystyrene Foam
  • No Drain Needed on SER 1504N, SER 2004N, SER 3204N


Details

  • CASE -22 gauge galvanized steel on the SER2004/2004N; 24 gauge galvanized steel on the SER1504/1504N. Baked powder coated paint, antique white. Insulated with 1" (25 mm) high density polystyrene foam to prevent condensation and meet the requirements of the Underwriters Laboratories 94HF. 
     
  • MOTORS -Two (2) German-manufactured, factory-balanced ebm™ motors with backward curved blades. Motors come with permanently lubricated sealed bearings to guarantee long life and maintenance-free operation. Seven (7) year warranty. 
     
  • CORE -Semi-permeable energy recovery cores configured for an efficient cross-flow ventilation. Manufactured to withstand extreme temperature variations. Core warranty 5 years.
  • FILTERS -Two (2) Washable Electrostatic Panel Type Air Filters, SER 1504 is 8.5" (216mm) x 15" (380mm) x 0.125" (3mm), SER 2004 is 11.75" (298mm) x 15" (380mm) x 0.125" (3mm). 
     
  • CONTROLS -External three (3) position (Low/Stand By/Medium) rocker switch that will offer continuous ventilation. Fantech offers a variety of external controls. (see optional controls). 
     
  • DEFROST -A preset 5 minute defrost sequence is activated at an outdoor air temperature of 23°F (-5°C) and lower. The unit then returns to normal operation for 25 minutes, and continues cycle. 
     
  • SERVICEABILITY -Core, filters, motors and drain pan can be easily serviced through latched access door. Core conveniently slides out with ease on an improved railing system. Electrical box, placed on the outside of the unit, can also be easily accessed.


Air Flow

The amount of air, rated in cubic feet per minute, that the unit can move.

Air Flow
200 CFM
For Homes Up To
4200 sqft
Transfers Heat
Yes
Transfers Moisture
Yes
Duct Connection Diameter

The diameter of round duct connected to the fitting.

Duct Connection Diameter
6 inches
Product Weight
66 lbs
Width
27 87/100 Inches
Depth
17 37/100 Inches
Height
20 1/2 Inches
Voltage
120 Volts
Frequency
60 Hz

These accessories will ship for free if purchased at the same time as the Fantech SER2004.

AIR EXCHANGER ACCESSORIES
Fantech CG 5
Fantech CG 6

Contour Grille with collar for 6in. duct

$16.99 Qty:
Fantech COM 6M
Fantech COM 6M

6in. Metal Supply and Exhaust Vent Hood Kit for Fantech HRV and ERV Units

$58.99 Qty:
EDF 1
Fantech EDF 1

Triple-function Control for Fantech HRVs and ERVs

$33.99 Qty:
fantech ftd7 timer
Fantech FTD 7

7 Day Heavy-Duty Grounded Programmable Digital Timer, 15A

$29.99 Qty:
Fantech HS 4W
Fantech HS 6W

Louvered Shutter with tailpiece, 6in. Round Duct

$12.99 Qty:
Fantech IG Series
Fantech IG 6

Inlet Guards, 6in. Duct

$6.99 Qty:
IR Series
Fantech IR 6

6in. Duct Iris Damper – manual

$48.99 Qty:
Fantech LD Series
Fantech LD 6

Silencer, 6in. Duct

$94.99 Qty:
Fantech MGE Series
Fantech MGE 6

Metal Exhaust Grille with collar for 6in. duct

$19.99 Qty:
Fantech MGS Series
Fantech MGS6

Metal Supply Grille with collar for 6in. duct

$24.99 Qty:
Fantech RC Series
Fantech RC6

Roof Caps, 6in. Duct (galvanized steel)

$68.99 Qty:
Fantech RSK Series
Fantech RSK 6

Backdraft Damper, 6in. Duct

$13.99 Qty:
RTS2
Fantech RTS2

15-Minute Timer for Fantech HRV and ERV Units

$14.99 Qty:
R4.2 INSULATED FLEXIBLE DUCTING
Flexible Ducting Photo with Andrew
Alpine AG-B4FLX6

6" x 25', R-4.2 Insulation, Flexible Ducting

$28.99 Qty:
R8.0 INSULATED FLEXIBLE DUCTING
Flexible Ducting Photo with Andrew
Alpine AG-B8FLX6

6" x 25', R-8.0 Insulation, Flexible Ducting

$45.99 Qty:
Silver Flex Ducting
Alpine AG-S8FLX6

6" x 25', R-8.0 Insulation, Metalized Flexible Ducting

$45.99 Qty:
TOOLS
640-UL25
Diversitech 640-UL25

Diversitech 640-UL25 Foil Tape

$17.99 Qty:




Get expert assistance from our team

Call our product specialists at 800-865-5931
Mon-Fri 7am-7pm, Sat 9am-2pm CT

Sal
Joseph
Brian
Jack
Peter
Bill

Or ask us here: