(800) 865-5931 Mon-Thu 7a-7p, Fri 7a-6p, Sat 9a-3p CT
AMERICA'S HEATING & COOLING STORE™
EST. 2002
Home Air Products™
0
Free Shipping See Details
Enter your zip for personalized product and service recommendations.
YOUR SHOPPING EXPERIENCE IS NOW PERSONALIZED.
Roll over image to zoom in.
Actual product may vary from photos.

Fantech SHR 14104

1428 CFM Heat Recovery Ventilator

Have It Installed

Professional installation now available in , !

  • Free online quotes
  • No home visit
Learn More
Back In Stock Within 11-14 days

Includes

The SHR 14104 Commercial Heat Recovery Ventilation system (HRV) complements today's tight buildings. Fantech Heat Recovery Ventilators (HRV) are designed to supply air into a building while exhausting an equal amount of contaminated air to the outside. The aluminum heat exchanger core transfers sensible energy between air streams resulting in tempering of the supply air and reduced loads on the HVAC system.

A preset defrost sequence is activated at an outdoor air temperature of 23degrees Fahrenheit and lower. During the defrost sequence, the supply blower shuts down and the exhaust blower switches to high speed to maximize the effectiveness of the defrost strategy. The unit then returns to normal operation, and continues the cycle.

  • Airflow up to 1430 cfm at 0.4in. PS
  • Push-pull configuration
  • External low voltage contacts
  • Dual service doors and reversible electrical box
  • External three position switch (Low/Standby/Medium)

Specifications

Defrost Type
Exhaust
Airflow Capacity
1410 CFM
Air Flow

The amount of air, rated in cubic feet per minute, that the unit can move.

Air Flow
1428 CFM
Minimum Air Flow
640 cfm
Amperage

The amps that the unit is designed to operate at.

Amperage
10.8 Amps
Fan Speeds
3
Duct Size
8 x 24 inches
Product Weight
276 lbs
Meets CSA Standards

Canadian Standards Association

Meets CSA Standards
Yes
Shipping Length
26 in
Shipping Width
54 in
Length
25 7/10 Inches
Width
18 Inches
Depth
51 2/5 Inches
Height
36 Inches
Static Pressure
0.4 in. wg
Voltage
120 Volts
Frequency
60 Hz
Voltage Phase
1
Parts Warranty
3 Year

Accessories

*Any accessories purchased with the Fantech SHR 14104, are eligible for free shipping.
AIR EXCHANGER ACCESSORIES
Fantech EDF 1

Triple-function Control for Fantech HRVs and ERVs

$32.95 Qty:
Fantech IR 4

4in. Duct Iris Damper – manual

$49.99 Qty:
Fantech IR 5

5in. Duct Iris Damper – manual

$49.99 Qty:
Fantech IR 6

6in. Duct Iris Damper – manual

$59.99 Qty:
Fantech IR 8

8in. Duct Iris Damper – manual

$64.99 Qty:
Fantech MDEH 1

2 Wire Mechanical, Low Voltage Dehumidistat

$17.99 Qty:
Fantech MGE 4

Metal Exhaust Grille with collar for 4in. duct

$14.99 Qty:
Fantech MGE 5

Metal Exhaust Grille with collar for 5in. duct

$19.99 Qty:
Fantech MGE 6

Metal Exhaust Grille with collar for 6in. duct

$19.99 Qty:
Fantech MGE 8

Metal Exhaust Grille with collar for 8in. duct

$26.99 Qty:
Fantech MGS4

Metal Supply Grille with collar for 4in. duct

$18.99 Qty:
Fantech MGS5

Metal Supply Grille with collar for 5in. duct

$20.99 Qty:
Fantech MGS6

Metal Supply Grille with collar for 6in. duct

$20.99 Qty:
Fantech MGS8

Metal Supply Grille with collar for 8in. duct

$31.99 Qty:
Fantech RTS2

15-Minute Timer for Fantech HRV and ERV Units

$17.99 Qty:
TOOLS
Diversitech 640-UL25

Diversitech 640-UL25 Foil Tape

$24.99 Qty:

Q&A

Expert Assistance

Get expert assistance from our team
Call our product specialists at 800-865-5931
Mon-Thu 7a-7p, Fri 7a-6p, Sat 9a-3p CT
Bill
Brian
Jack
Peter
Russ
Sal
Message
Please enter a message
Email
Please use a valid email
Phone (optional)
Please use a valid phone number
Name (optional)
Please use a valid phone number