SHR 700 690 CFM Heat Recovery Ventilator (HRV)
Have It Installed
Professional installation now available in , !
- Free online quotes
- No home visit
The SHR 700 Commercial Heat Recovery Ventilation system (HRV) complements today's tight buildings. Fantech Heat Recovery Ventilators (HRV) are designed to supply air into a building while exhausting an equal amount of contaminated air to the outside. The aluminum heat exchanger core transfers sensible energy between air streams resulting in tempering of the supply air and reduced loads on the HVAC system.
A preset defrost sequence is activated at an outdoor air temperature of 23degrees Fahrenheit and lower. During the defrost sequence, the supply blower shuts down and the exhaust blower switches to high speed to maximize the effectiveness of the defrost strategy. The unit then returns to normal operation, and continues the cycle.
- Airflow up to 687 cfm at 0.4in. PS
- Push-pull configuration
- External low voltage contacts
- Dual service doors and reversible electrical box
- External three position switch (Low/Standby/Medium)
|Airflow Capacity||690 CFM|
|Air Flow||688 CFM|
|Minimum Air Flow||723 cfm|
|Duct Diameter||14 inches|
|Duct Connection Diameter||14 inches|
|Drain Connection (I.D.)||0.5 inch|
|Product Weight||185 lbs|
|Shipping Weight||185 lbs|
|Shipping Length||54 in|
|Shipping Width||38 in|
|Width||36 1/4 Inches|
|Depth||36 1/2 Inches|