794 CFM Heat Recovery Ventilator (HRV)
Have It Installed
Professional installation now available in , !
- Free online quotes
- No home visit
This model has replaced SHR8005R. This model requires you buy the BPM0820 by-pass module, accessorized below. Seen here:
The SHR 800 Commercial Heat Recovery Ventilation system (HRV) complements today's tight buildings. Fantech Heat Recovery Ventilators (HRV) are designed to supply air into a building while exhausting an equal amount of contaminated air to the outside. The aluminum heat exchanger core transfers sensible energy between air streams resulting in tempering of the supply air and reduced loads on the HVAC system.
During the defrost sequence, a motorized damper temporarily blocks the incoming fresh air stream so that the warm air from the building can circulate through the HRV. The exhaust blower shuts down and the supply blower switches into high speed to maximize the effectiveness of the defrost strategy.
- Airflow up to 794 cfm at 0.4in. PS
- Push-pull configuration
- External low voltage contacts
- Dual service doors and reversible electrical box
- External three position switch (Low/Standby/Medium)
|Airflow Capacity||795 CFM|
|Air Flow||795 CFM|
|Static Pressure Drop||0.4 in. w.c.|
|Duct Diameter||20 inches|
|Product Weight||157.6 lbs|
|Shipping Weight||205 lbs|
|Shipping Length||42 in|
|Shipping Width||28 in|
|Width||36 2/5 Inches|