Hard Wire Junction Box for Amana PTAC Units 230/208 Volts
Have It Installed
Professional installation now available in !
- Free online quotes
- No home visit
*Photo of a similar product
Used to permanently wire to the chasis when a standard subbase and power cord are not utilized.
The hard wire junction box kit is used to direct wire the unit when it is not desirable to use the standard unit subbase or the unit power cord. The junction box provides a protected enclosure for electrical connections as required by some electrical codes.
The hard wire junction box is intended to be mounted on the floor or adjacent wall.
The junction box is furnished with approximately 2-1/2 feet of 1/2 inch flexible steel conduit and a metal box for securing the conduit to the unit cabinet at the incoming power opening.
An optional 230/208 volt power switch assembly is avaliable for use with the hardwire junction box or subbase. The switch provides a power on/off function at the unit as required by some electrical codes. A replacement junction box cover plate is provided with each switch kit.
|Power Requirements||230/208 Volts|
|Voltage||208 / 230 Volts|