Blueridge BMKH30-16YN4GA KIT

Ductless mini split systems can provide both cooling and heating, or just cooling.

The total amount of cooling delivered by the system. This number is inclusive of all interior air handlers.

The amount of heat, rated in BTUs that the item can produce.

The amount of heat, rated in British Thermal Units (BTUs), that the unit can deliver into the space. Not sure how many BTUs you need? Try our easy Equipment Sizing Estimator.

Seasonal Energy Efficiency Ratio (SEER) is a measure of cooling over an entire season. It is determined by comparing the amount of cooling produced in BTUs in relation to the amount of electricity used. A higher SEER means a system is more energy efficient and would provide comfort at a lower utility cost than a lower SEER system.

The measure of air conditioner efficiency at its maximum load

Coefficient of Performance is the efficiency ratio of the amount of heating or cooling provided by a heating or cooling unit to the energy consumed by the system. The higher the Coefficient of Performance the more efficient the system. Resistance electrical heating (such as electric baseboards) for example has a Coefficient of Performance of 1.0

A measure of heat pump efficiency while in a heating mode. The higher the number the better the energy efficiency.

Inside air conditioning systems are liquid/gas refrigerant. There are two types of this refrigerant available for use, R-22 (more commonly known as Freon), and a newer alternative R-410A.

An air conditioning system does not consume refrigerant, but reuses it. As long as there are no leaks in the refrigerant circuit, there is no need to ever add more refrigerant to an air conditioning system.

Although R-22 is an effective refrigerant, if it is released into the atmosphere it can contribute to the depletion of the Earth’s ozone layer. The EPA has mandated the phasing out the use of R-22. It is being replaced by R-410A.

As of 2010, manufacturers are required to make all new air conditioners with R-410A. However, R-22 is still available for sale in existing pre-2010-manufactured equipment, and for use in servicing existing R-22 equipment. By 2020, R-22 will no longer be manufactured, but will still be recycled and available for sale.

The amount of water that can be removed from the air rated in pints per hour.

This unit is charged with enough refrigerant for the condensing unit evaporator coil and the length of line stated. Longer line sets can be used but would require some additional refrigerant for appropriate operation.

The maximum capacity breaker that the unit can be connected to (This is the best option for consistent performance)

The maximum length of line set approved for use with this product.

The maximum vertical distance between the condensing unit and the air handler.

There are two main types of connections for HVAC products brazed and flared. Brazed connections are typically used in standard split systems, and flare connections are typically used on mini splits and can be connected using a wrench.

Reciprocating compressors use a piston to compress the refrigerant.

Rotary compressors utilize a roller rotating eccentrically inside a cylinder and a spring mounted blade always rubbing against the roller. As the eccentric rotates towards the blade, the space is decreased and the refrigerant is compressed. Rotary compressors are very efficient.

Scroll compressors consists of 2 scrolls to pressurize refrigerant. Often 1 scroll is fixed and the other orbits eccentrically compressing the gas between the scrolls. Scroll compressors are quiet, smooth and offer highest efficiency ratio of all compressor types.

Scroll Ultratech™ compressors are advanced scroll compressors which offer more features and better diagnostics.

Products earn the ENERGY STAR label by meeting the energy efficiency requirements set forth in ENERGY STAR specifications. The EPA establishes these specifications based on the following set of principles:

• Product categories must contribute significant energy savings nationwide.
• Qualified products must deliver the features and performance demanded by consumers, in addition to increased energy efficiency.
• If the qualified product costs more than a conventional, less-efficient counterpart, purchasers will recover their investment in increased energy efficiency through utility bill savings, within a reasonable period of time.
• Energy efficiency can be achieved through broadly available, non-proprietary technologies offered by multiple manufacturers.
• Product energy consumption and performance can be measured and verified with testing.
• Labeling would effectively differentiate products and be visible for purchasers.

The number of interior air handlers connected to the condensing unit. Typically one, two, or three zones.

The outside diameter of the liquid line pipe (the inside diameter of the connection on the equipment).

The outside diameter of the suction line (the inside diameter of the connection on the equipment).

The noise produced by the unit rated in decibels. 30dbs is equivalent to a whisper, 60dbs is equivalent to a normal conversation, 90 dbs is equivalent to a lawn mower.

The noise produced by the unit rated in decibels. 30dbs is equivalent to a whisper, 60dbs is equivalent to a normal conversation, 90 dbs is equivalent to a lawn mower.