Honeywell VisionPRO® 8000 Programmable Touchscreen Thermostat with RedLINK™ Equipment Remote and Equipment Interface Modules
Have It Installed
Professional installation now available in !
- Free online quotes
- No home visit
Includes
Services
HIGHLIGHTS
The VisionPRO® 8000 is a 7 day programmable touchscreen thermostat that is selectable for residential or light commercial use. This thermostat works with RedLINK™ wireless accessories including the RedLINK™ Internet Gateway, Portable Comfort Control, Wireless Outdoor Sensor, Wireless Indoor Sensor, Wireless Entry/Exit Remote, Wireless Vent and Filter Boost Remote.
Features:
- Smart Schedule - programs in seconds for any lifestyle
- Patented interview based programming and installer setup
- RedLINK™ wireless communication
- Selectable for residential and light commercial applications. Meets commercial code and is title 24 compliant
- Alerts and user interactions log - keeps a searchable history of alerts and setting changes to the thermostat to determine if there is a system malfunction or if the issue was caused by a user error
- Dual powered - battery or hardwired (C wire)
- Precise temperature control (+/- 1° F) for reliable and consistent temperature
Honeywell's Equipment Remote Module (ERM) uses reliable RedLINK technology to let control devices, such as a thermostat, communicate wirelessly with outdoor two-stage air conditioners, heat pumps or an indoor boiler. The ERM eliminates wiring needs, so there are fewer holes to drill and wires to run resulting in faster, easier installation.
Features:
- Simple user interface and setup
- Temperature sensor terminals for outdoor temperature sensing and indoor freeze protection
- LEDs for fast, easy equipment checks
- Reduced installation time
- Reduced wiring issues
- Eliminating the need to run long lengths of wire reduces the potential of damage to the home
- Powerful wireless range ensures reliable operation in nearly any application
Powered by RedLINK reliability, this Equipment Interface Module controls up to 4-stages of heat and 2-stages of cool in a heat pump system and up to 3-stages of heat and 2-stages of cool in a conventional system. Three sets of Universal IAQ contacts serve to control humidification, dehumidification, and ventilation.
Features:
- Four sensor inputs for wired sensors or dry contact devices.
- Compatible with all Prestige IAQ and new VisionPRO thermostats.
Specifications
Manual/Digital | Digital |
Stages of Heat | 3 w/ Heat Pump |
Touchscreen | Yes |
Stages of Cool | 2 |
Programming Days | 7 |
Use with Heat Pump | Yes |
Power Method | Hardwired |
Use with Gas/Oil | Yes |
Use with Electric Furnace | Yes |
Programmable Fan | Yes |
Dual-Fuel Compatible | Yes |
Resume / Adaptive Intelligent Recovery Capability | Yes |
Backlit Display | Yes |
Outdoor Temperature Sensor Capability | Yes |
Indoor Temperature Sensing Capability | Yes |
Ventilation Control/Independent Circuit Switching | Yes |
On-Screen Help | Yes |
Auto Changeover | Yes |
Memory Back-Up | Yes |
Filter Indication | Yes |
Humidifier Panel Indication | Yes |
Humidity Control | Yes |
Vacation Hold | Yes |
Keypad Lockout | Yes |
Remote Accessible | Yes With RedLINK Gateway |
Shipping Weight | 2.4 lbs |
Shipping Height | 7.1 in |
Shipping Length | 4.6 in |
Shipping Width | 7.1 in |
Limited Warranty | 5 Years |
Accessories
Documents
-
VisionPRO 8000 Commercial Brochure 2013
(PDF, 1021 KB) -
VisionPRO 8000 Installation Guide 2016
(PDF, 3.45 MB) -
VisionPRO 8000 Residential Brochure 2013
(PDF, 1.66 MB) -
VisionPRO 8000 Spec Sheet 2017
(PDF, 7.67 MB) -
VisionPRO 8000 User Guide 2012
(PDF, 20.3 MB) -
Honeywell Prestige and VisionPRO EIM Installation Guide 2017
(PDF, 4.85 MB) -
Honeywell Prestige and VisionPRO EIM Spec Sheet 2013
(PDF, 16.6 MB) -
Honeywell Programmable Thermostats Comparison Chart
(PDF, 255 KB) -
Honeywell ERM5220R - Install Guide
(PDF, 4.28 MB) -
Honeywell ERM5220R - Product Data and Specifications
(PDF, 2.39 MB)