"C" Vent Kit (Flue Manifold) for 15-3/4 - 23-5/8 in. Walls, Rinnai EX-DT Direct Vent Wall Furnaces
"C" Vent Kit (Flue Manifold) for 15-3/4 - 23-5/8 in. Walls, Rinnai EX-DT Direct Vent Wall Furnaces
Model: Rinnai FOT-153
Model: Rinnai FOT-153
Only 3 left in stock
The Rinnai FOT-153 "C" vent kit is the flue manifold and wall terminal used to vent a Rinnai EX-DT direct vent wall furnace through an exterior wall 15-3/4 to 23-5/8 in. (400-600 mm) thick. Every EX-DT furnace ships with the "A" kit (FOT-151) for 4-1/2 to 9-1/2 in. walls; order this kit when the wall is thicker than that.
Compatible with
- EX08DTN / EX08DTP
- EX11DTN / EX11DTP
- EX17DTN / EX17DTP
- EX22DTN / EX22DTP
- EX22DTWN / EX22DTWP (White)
- EX38DTN / EX38DTP
- EX38DTWN / EX38DTWP (White)
Rinnai vent kit selection by wall thickness
- FOT-150 "S" Vent Kit: 3 to 4-1/2 in. walls
- FOT-151 "A" Vent Kit: 4-1/2 to 9-1/2 in. walls
- FOT-152 "B" Vent Kit: 9-1/2 to 15-3/4 in. walls
- FOT-153 "C" Vent Kit: 15-3/4 to 23-5/8 in. walls
- FOT-154 "D" Vent Kit: 23-5/8 to 31-1/2 in. walls
The vent passes through a 3-1/8 in. (80 mm) hole in the wall. Measure the wall thickness through the drilled hole and install the kit as shown in the furnace's Installation and Operation Manual.
Questions about this product?
Ask our specialists. Free help with sizing, setup, and everything in between.
We're closed now. Send a message and we'll reply when we open.
Mon–Fri 7am–7pm · Sat 10am–4pm · Sun 10am–3pm CT