Sensi Common Wire (C-Wire) Kit, Adds a C-Wire Over Existing Thermostat Wiring for Wi-Fi Thermostats
Sensi Common Wire (C-Wire) Kit, Adds a C-Wire Over Existing Thermostat Wiring for Wi-Fi Thermostats
Model: Copeland SA11
Wi-Fi thermostats need constant 24-volt power through a common (C) wire, and many older homes don't have one. The SA11 Common Wire Kit solves that without running new cable. The kit mounts near the HVAC control board, and a diode harness at the thermostat combines two signals onto one conductor, freeing an existing wire to act as the C-wire.
That lets a 5-wire thermostat work over 4 existing wires, or 5 wires replace a 6-wire application. It's the C-wire solution Copeland recommends for Sensi thermostats when no C-wire is available.
Features:
- Adds a C-wire without running new thermostat cable
- Lets a 5-wire thermostat work over 4 wires, or 5 wires replace 6
- Kit mounts within 9 in. of the HVAC equipment terminal block; diode "Y" harness installs at the thermostat
- Works with 18–22 AWG unshielded thermostat wire, up to 100 ft (18 AWG) or 36 ft (22 AWG)
- Includes kit, diode "Y" harness and 4 wire nuts
- Recommended C-wire solution for Sensi thermostats
- Tested to comply with FCC standards
Questions about this product?
Ask our specialists. Free help with sizing, setup, and everything in between.
We're closed now. Send a message and we'll reply when we open.
Mon–Fri 7am–7pm · Sat 10am–4pm · Sun 10am–3pm CT