12,000 BTU (1 Ton) Cooling, 10,600 BTU Electric Heating, 230/208 Volts, Through the Wall AC With 3.45kW Heat, R-32
12,000 BTU (1 Ton) Cooling, 10,600 BTU Electric Heating, 230/208 Volts, Through the Wall AC With 3.45kW Heat, R-32
Model: Frigidaire FHTE123WA2
Model: Frigidaire FHTE123WA2
The Frigidaire FHTE123WA2 is a 12,000 BTU through-the-wall air conditioner with 10,600 BTU of electric heat, built for rooms up to 550 sq ft — a living room, a large primary bedroom, or a studio apartment. It installs in a wall sleeve instead of a window, runs on a 208/230-volt circuit, and runs on R-32, the lower-GWP refrigerant replacing R-410A in new room air conditioners.
| 12,000BTU cooling | 10,600BTU electric heat | 550sq ft max | 208/230 V20 A circuit |
Who it’s for
- Apartments, condos and hotel-style rooms with an existing through-the-wall sleeve and a 240-volt receptacle
- Replacing an older 230-volt wall unit without giving up a window
- Rooms up to 550 sq ft that need real heat in spring and fall
Will it fit my wall sleeve?
The FHTE123WA2 cabinet is 24" wide x 14.5" high. It slides into a standard through-the-wall sleeve with an outside size of 26" wide x 15.5" high, in walls up to 18" thick; the sleeve’s steel walls and the included trim kit take up the gap between the cabinet and the opening. Sleeves run 16–22" deep (the Frigidaire 912001373 is 17.5"), and the unit is 21.5" deep, so it can extend past a shallower sleeve. Frigidaire’s installation instructions also cover several common existing sleeves, including GE/Hotpoint/Amana, Friedrich (WSE and USC) and Fedders/Emerson, and an EA120T adaptor trim kit is available for larger sleeves. The sleeve itself is not included — measure an existing sleeve before you order, or add the Frigidaire 912001373 wall sleeve for a new opening.
Specifications
| Cooling capacity | 12,000 BTU (1 ton) |
| Heating | 10,600 BTU electric heat (3,450 W) |
| Room size | 451–550 sq ft — size up for direct afternoon sun or high ceilings |
| Efficiency | CEER 9.5 |
| Dehumidification | 3.5 pints per hour |
| Airflow | 230–273 CFM, three fan speeds |
| Sound level | 58 / 59 / 61 dBA (low / medium / high) |
| Refrigerant | R-32 |
| Unit size | 24" W x 14.5" H x 21.5" D |
| Weight | 75 lb — a two-person lift is easiest |
| Power cord | 66" (5.5 ft) with LCDI safety plug |
| In the box | Trim kit, rear grille and remote control |
| Check before you order Power: 208/230 V, 6-20P plug — needs a matching 20-amp, 240-volt receptacle, not a standard household outlet. Draws 6.5 A / 1,180 W cooling and 15 A / 3,450 W heating. Sleeve: Requires a standard 26" W x 15.5" H (outside size) through-the-wall sleeve, sold separately; the 24" x 14.5" cabinet slides inside it. Wall up to 18" thick. |
Controls and everyday features
- Remote control — Change the temperature, mode and fan speed from across the room.
- Cool, heat, fan and dry modes — Plus a sleep setting that eases the temperature overnight.
- Energy saver — Cycles the fan with the compressor instead of running it continuously.
- 24-hour timer and auto restart — Schedule on/off times; settings return automatically after a power outage.
- Washable filter with check reminder — Front access; no replacement filters needed for everyday dust.
- Low-voltage start-up — Helps the compressor start when household voltage dips.
Accessories (sold separately)
- Frigidaire 912001373 wall sleeve — Galvanized steel sleeve for a new through-the-wall opening (not needed if a compatible sleeve is already in the wall).
- Frigidaire FRPARAC7 PureAir RAC-7 allergen filter — Slides in behind the front grille to trap finer airborne particles than the standard dust filter.
Warranty
1 year parts and labor from Frigidaire.
Frigidaire FHTE Use and Care Doc(PDF, 8.58 MB)
Frigidaire FHTE Installation Instructions(PDF, 9.84 MB)
Frigidaire FHTE123WA2 Spec Sheet(PDF, 401 KB)
Questions about this product?
Ask our specialists. Free help with sizing, setup, and everything in between.
We're closed now. Send a message and we'll reply when we open.
Mon–Fri 7am–7pm · Sat 10am–4pm · Sun 10am–3pm CT