Place Your Order by 1 pm for Same-Day Shipping

America's Heating & Cooling Store, Est 2002
Free Shipping
See Details
My Location:
Chicago, IL

1.5 Ton, W 14 x H 14 x D 21, Painted Cased Evaporator Coil

1.5 Ton, W 14 x H 14 x D 21, Painted Cased Evaporator Coil

Model: Goodman CAPFA1714A6

Actual product may vary from photos.
highlights

The Goodman® CAPFA Cased Upflow/Downflow Indoor Coils are made for split system air conditioners and heat pumps. The coil’s cabinet is painted Architectural Gray.

 

If you wish to pair the coil with a condenser or heat pump of the smaller tonnage, an orifice in that tonnage will need to be used (unless a TXV is required instead). If you are purchasing a new Goodman heat pump or condenser, the required orifice can be found on our site by clicking the Accessories tab on the product page for that item. However, if you are purchasing this coil only and wish to pair it with equipment of the lower tonnage rating as listed on the description for this coil, you will need to separately purchase the smaller orifice and install it in the coil before operating. See this step-by-step guide to learn how to easily do so. Alternatively, instead of an orifice a thermostatic expansion valve (TXV) may be used or required for some equipment, such as 14 SEER and higher heat pumps and all equipment that uses R-410A refrigerant (see equipment spec sheets for details or call us for assistance).

 

For Tips for Selecting Matched Components and Line Sets click here.

 

Standard Features

 

  • Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology

  • Optimized for use with R-410A refrigerant

  • A corrosion resistant thermoplastic drain pan features a ‘no water-retention’ design.

  • Available with check flowrater expansion device for heat pump or cooling-only applications

  • The multi-louvered fins are acid-etched to help drain condensate faster, compared to aluminum fins that are not acid-etched. These combined features help deliver improved airflow with minimal static pressure.

  • The 7mm grooved aluminum tubing enhances the heat transfer properties of the refrigerant.

  • Single piece access panel with a tight seal helps keep conditioned air from

           escaping

 

Cabinet Features

 

  • High-quality post-paint cabinet

  • Split-seam front for easy access

Specs
System Information
view information
Configuration
Downflow / Upflow
Number of Rows
3
view information
Refrigerant
R-22 / R-410A
Performance
view information
Base Cooling Capacity
17000 BTU
view information
Cooling Tonnage
1.5 Tons
Line Set Information
view information
Liquid Line Size (OD)
3/8 Inches
view information
Suction Line Size (OD)
3/4 Inches
Product Dimensions
view information
Cabinet/Chassis Size
A
Coil Width
14.000000000 inches
Coil Height
14.000000000 inches
Coil Depth
21.000000000 inches
Product Weight
29 lbs
Shipping Weight
29 lbs
Important Measurements
view information
Orifice Size
0.051 inches
Plenum Opening Width
13 inches
Reviews
Let's Talk
Get expert assistance from our team
Call our product specialists at: (800) 865-5931
Open Now
© Copyright 2002-2024, Alpine Home Air Products
Privacy Policy