5 Ton AC, 110,000 BTU 80% AFUE Two Stage Variable Speed Gas Furnace, 13 SEER Horizontal Split System Kit
5 Ton AC, 110,000 BTU 80% AFUE Two Stage Variable Speed Gas Furnace, 13 SEER Horizontal Split System Kit
Model: Blueridge BA13L60P-BG802UH110CV20-BH1P60D (Kit No. D1005)


Model: Blueridge BA13L60P-BG802UH110CV20-BH1P60D (Kit No. D1005)
Was: $3,770.00
Savings: $50.00
- Pro Installation (Learn More)

To use LP fuel, this unit requires an LP Conversion Kit. See Accessories
When you consider a Blueridge system, quality and value are a given. You’re getting peace of mind with great features and a smart design—and best of all, you get it right now. When you think about everything Blueridge delivers, your decision is easy. With Blueridge, all your heating and cooling questions are answered. The performance and reliability you want are right here, and ready to go to work.
Blueridge air conditioning units are built in North America for an unbeatable combination of quality and price. They provide highly efficient, powerful cooling during hot weather, and are designed to last, with quiet operation, and ease of maintenance. Blueridge furnaces are built in North America and are designed for efficient and quiet operation along with ease of installation and maintenance.
This system is designed to be installed in an horizontal application with the furnace laying on its side. This system consists of a 5 ton 13 SEER AC condensing unit, a 21 inch tall 2 stage variable speed gas furnace, and 24.5 inch tall horizontal evaporator coil. This is a certified, 13 SEER matching AC system. Although the functional efficiency should be higher due to the advanced blower motor in the furnace.
The 2 stage furnace is designed to run at full output or 70% of its rated output. As the furnace increases and decreases the heat it generates the fan speed increases and decreases with it. This has several advantages. The furnace will run for longer periods of time at lower output levels, this increases both the electrical and gas efficiency of the system, and makes these furnaces very quiet. The longer run time will more effectively mix the air in your home helping to even out the temperatures throughout. The variable speed motor is a smart motor that can adjust to conditions inside your duct system to optimize the air delivery through your home. The furnace is designed to use natural gas but it can be converted to use propane. The propane (lp) conversion kit and other install components are in Accessories section below.
We design our system bundles to provide homeowners and contractors with a new HVAC system in one simple purchase. If you'd like help picking out the best option for your needs, give us a call at 1 800 865 5931. Our system design consultants have decades of combined experience helping homeowners select the right equipment. If you have any questions, concerns or just need some guidance, please get in touch with us. We're here to help.
Condenser Standard Features:
-
R410a Refrigerant
-
Factory installed high pressure switch
-
High-quality condenser coil with copper tubing and enhanced louvered fin for maximum heat transfer capacity
-
Top discharge with fan orifice to direct hot air away from living area and shrubbery
-
All units factory run tested
-
Available with louvered panel or wire guard coil protection
-
Easy access to electrical panels
-
Corner mounted service valves for easy hook-up and service
-
Liquid line filter drier shipped loose
-
Charged for 15 feet of interconnecting tubing
-
All units are ETL and ETLC approved and AHRI certified
Furnace Features:
-
Efficient Variable Speed blower motor
-
Easily removable slide-out blower design
-
Dynamically balanced blower wheel with resilient motor mounts for smooth and quiet operation
-
Aluminized steel primary heat exchanger with crimped non welded construction
-
Two stage gas valve
-
Integrated ignition and fan control
-
Self diagnostics saving last 10 fault codes regardless of power interruption
-
Hot surface ignition system uses silicon nitride ignitor
-
Control features 120 volt electronic air cleaner and humidifier terminals
-
Control circuit is fuse protected
-
Color coded control wiring
-
Compatible with single or two stage thermostats for heating. Two stage thermostat is recommended when installed with a two stage cooling unit.
Coil Features:
-
Dedicated Horizontal
-
Tightly sealed, painted steel cabinet with wall to wall insulation to ensure <2% air leakage
-
Single protruding right side dual drain port for easy installation and service access
-
Omniguard™ Total Corrosion Protection* our advanced evaporator coil helps protect against leaks and corrosion for long term performance
-
Microban® antimicrobial additive in the drain pan to resist mold and mildew growth
-
Aluminum tubing, hairpins, distributors and header tubes. Copper refrigerant connections for easy brazing to both liquid and suction lines
-
Preformed flanges in outlet for quick and easy plenum connections
-
One of the lowest water retention drain pans in the industry to minimize mold and mildew growth
-
Interlocking door assemblies and snug line seal grommets to minimize air leakage
-
Foil-face insulation for easy cleaning
-
Tubing located at door split for easy coil service or cleaning
-
All drain pans are compatible with UV lights
-
All piston coils are compatible with R22 or R410a
-
10-year limited parts warranty available when applied with a system. See limited warranty document for details.
These components were selected by HVAC specialists to maximize their performance and efficiency. This system is certified under AHRI # 207254382 to give you 13 SEER
Please note that this condenser comes pre-charged with R-410A liquid refrigerant and by Federal law cannot be released to the atmosphere. You can purchase this equipment without being EPA certified, and if you are mechanically inclined you may perform about 90% of the equipment installation yourself. However we strongly recommend to have a professional heating/cooling contractor do the final part of the installation including managing the refrigerant. An HVAC contractor has the tools and know-how to do this work. Also, having a contractor perform the final startup and inspection of this condenser validates your warranty with Alpine.
Click the links below to check each components' specifications and documentation.
|
BG802UH110CV20 |
|
|
BH1P60D |
|
|
BA13L60P |
|
Enjoy free shipping on any accessories purchased with the Blueridge BA13L60P-BG802UH110CV20-BH1P60D (Kit No. D1005).
Required Components for Installation
- Blueridge BG Gas Furnace User Manual(PDF, 302 KB)
- Blueridge BA13 BA16 Owners and Installation Manual(PDF, 782 KB)
- Blueridge AC Condenser Brochure(PDF, 6.23 MB)
- Blueridge 80% Gas Furnace Brochure(PDF, 4.00 MB)
- Blueridge BG802-V Gas Furnace Specifications Sheet(PDF, 466 KB)
- BG802UHV Installation Manual 5-23(PDF, 1.71 MB)
- Blueridge AHRI Certificate 207254382(PDF, 142 KB)
- Wire Gauge Sizes(PDF, 40.9 KB)
- Blueridge Unitary Equipment Warranty (Ver. 2.2)(PDF, 551 KB)
- Blueridge Horizontal Coil Installation Manual(PDF, 902 KB)
- Blueridge BA13 Spec Sheet(PDF, 1.10 MB)
- Blueridge Long Lineset Instructions(PDF, 671 KB)
- Blueridge Evaporator Coil Spec Sheet(PDF, 655 KB)
